844.423.7435
Equipment & Materials
-
Transient Generators
- Automotive Transient Immunity Generators
- Military Transient Pulse Generators
- Electrical Fast Transient EFT/Burst Generators
- Combination Wave/Surge Generators
- Multi-Test EMC Generators
- Ring Wave Immunity Generators
- Lightning Surge Generators
- Surge & Burst/EFT Generators
- Magnetic Field Generators
- Telecom Testing Generators
- EMI Receivers/EMC Analyzers
- RF Power Amplifiers
- RF Conducted Immunity
- RF Field Strength Meters
- Electrostatic Discharge (ESD) Guns
- EMC Antennas
- Antenna Preamplifiers
- Line Impedance Stabilization Networks (LISN's)
- EMC/EMI Signal Generators
- RF Power Meters
- Bulk Current Injection (BCI) Probes
- EMC Probes
- Coupling Decoupling Networks (CDN's)
- Power Fail Simulators
- Software for EMC Testing
- Calibration Equipment
-
International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- EN/IEC 61000-3-11
- EN/IEC 61000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- Military & Aerospace Standards
- Automotive EMC Standards
- CISPR Standards
- FCC Part 15
- CE Mark Testing
- ANSI/IEEE Standards
- Standards by Product/Industry
- Telecom Testing
EMC Manufacturers
-
Transient Generators
- Automotive Transient Immunity Generators
- Military Transient Pulse Generators
- Electrical Fast Transient EFT/Burst Generators
- Combination Wave/Surge Generators
- Multi-Test EMC Generators
- Ring Wave Immunity Generators
- Lightning Surge Generators
- Surge & Burst/EFT Generators
- Magnetic Field Generators
- Telecom Testing Generators
- EMI Receivers/EMC Analyzers
- RF Power Amplifiers
- RF Conducted Immunity
- RF Field Strength Meters
- Electrostatic Discharge (ESD) Guns
- EMC Antennas
- Antenna Preamplifiers
- Line Impedance Stabilization Networks (LISN's)
- EMC/EMI Signal Generators
- RF Power Meters
- Bulk Current Injection (BCI) Probes
- EMC Probes
- Coupling Decoupling Networks (CDN's)
- Power Fail Simulators
- Software for EMC Testing
- Calibration Equipment
-
International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- EN/IEC 61000-3-11
- EN/IEC 61000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- Military & Aerospace Standards
- Automotive EMC Standards
- CISPR Standards
- FCC Part 15
- CE Mark Testing
- ANSI/IEEE Standards
- Standards by Product/Industry
- Telecom Testing
Shop by Brand
MIL-STD-461 CS101
The EMC Shop stocks test equipment to perform MIL-STD-461 CS101 testing.
MIL-STD-461 CS101 Purpose
Conducted Susceptibility Testing on Power Lines, 30 Hz to 150 kHz
This test procedure is used to verify the ability of the EUT to withstand signals coupled onto input power leads. There are two methods provided for making measurements of the applied signal. The first uses an oscilloscope with a power input isolation transformer. The second uses a measurement receiver together with a transducer. The transducer is intended to electrically isolate the receiver from the EUT power and reduce the signal levels to protect the receiver.
MIL-STD-461 CS101 Test Setup
|
The test equipment required:
|
