844.423.7435
Equipment & Materials
-
Transient Generators
- Automotive Transient Immunity Generators
- Military Transient Pulse Generators
- Electrical Fast Transient EFT/Burst Generators
- Combination Wave/Surge Generators
- Multi-Test EMC Generators
- Ring Wave Immunity Generators
- Lightning Surge Generators
- Surge & Burst/EFT Generators
- Magnetic Field Generators
- Telecom Testing Generators
- EMI Receivers/EMC Analyzers
- RF Power Amplifiers
- RF Conducted Immunity
- RF Field Strength Meters
- Electrostatic Discharge (ESD) Guns
- EMC Antennas
- Antenna Preamplifiers
- Line Impedance Stabilization Networks (LISN's)
- EMC/EMI Signal Generators
- RF Power Meters
- Bulk Current Injection (BCI) Probes
- EMC Probes
- Coupling Decoupling Networks (CDN's)
- Power Fail Simulators
- Software for EMC Testing
- Calibration Equipment
-
International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- EN/IEC 61000-3-11
- EN/IEC 61000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- Military & Aerospace Standards
- Automotive EMC Standards
- CISPR Standards
- FCC Part 15
- CE Mark Testing
- ANSI/IEEE Standards
- Standards by Product/Industry
- Telecom Testing
EMC Manufacturers
-
Transient Generators
- Automotive Transient Immunity Generators
- Military Transient Pulse Generators
- Electrical Fast Transient EFT/Burst Generators
- Combination Wave/Surge Generators
- Multi-Test EMC Generators
- Ring Wave Immunity Generators
- Lightning Surge Generators
- Surge & Burst/EFT Generators
- Magnetic Field Generators
- Telecom Testing Generators
- EMI Receivers/EMC Analyzers
- RF Power Amplifiers
- RF Conducted Immunity
- RF Field Strength Meters
- Electrostatic Discharge (ESD) Guns
- EMC Antennas
- Antenna Preamplifiers
- Line Impedance Stabilization Networks (LISN's)
- EMC/EMI Signal Generators
- RF Power Meters
- Bulk Current Injection (BCI) Probes
- EMC Probes
- Coupling Decoupling Networks (CDN's)
- Power Fail Simulators
- Software for EMC Testing
- Calibration Equipment
-
International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- EN/IEC 61000-3-11
- EN/IEC 61000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- Military & Aerospace Standards
- Automotive EMC Standards
- CISPR Standards
- FCC Part 15
- CE Mark Testing
- ANSI/IEEE Standards
- Standards by Product/Industry
- Telecom Testing
Shop by Brand
MIL-STD-461 CS116
The EMC Shop stocks test equipment to perform MIL-STD-461 CS116 testing.
MIL-STD-461 CS116 Purpose
Conducted susceptibility, damped sinusoidal transients on cables and power leads.
This requirement is applicable from 10 kHz to 100 MHz for all interconnecting cables, including power cables, and individual high side power leads. Power returns and neutrals need not be tested individually. This test procedure is used to verify the ability of the EUT to withstand damped sinusoidal transients coupled onto EUT associated cables and power leads.
MIL-STD-461 CS116 Test Setup
|
The test equipment required:
|
Rent Now
Start testing and debugging your EUT to MIL-STD-461 CS116 conducted susceptibility requirements.