Description
The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured. The PAM-6000 has a small gain variation of ±1.5 dB. It can be powered by the rechargeable NimH batteries (included) when an external power source is not available.
Com-Power PAM-6000 Features:
- Broadband Frequency Range of 1 GHz - 6 GHz
- Low Noise Figure: 4 dB typical
- High Gain: 30 dB
- Low VSWR: 2:1 Input/1.8:1 Output
- Output Power: +13 dBm @ 1 dB compression
- Flatness: ± 1.5 dB
- Reverse Isolation: Greater than 30 dB
- Impedance: 50 Ohms
- Connector: N-type (f)
Videos
Custom Field
Weight 3.3 lbs. (1.5 kg)
Application/Test Type Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector 50Ω N-Type (f)
Dimensions 7.5 x 5 x 3 inches
Frequency Range 1 GHz - 6 GHz
Gain 30 dB typical (± 1.5 dB flatness)
Input 10 VDC, 2 dBm
Maximum Continuous Power +13 dBm @ 1 dB compression
VSWR 2.1:1 Input/1.8:1 Output