Radiated Immunity Integrated Test Systems

Quick Links

Information

Viewed products

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More View larger

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

New

  • Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
  • Built-in LF signal generator
  • Built-in LF amplifier
  • Built-in LF transformer 2:
  • Built-in frequency-selective voltage and current meter
  • Built-in load resistors
  • Automatic self-calibration
  • Frequency Range: 10 Hz - 250 kHz

More details

In Stock

Request Quote/More Info

PDF Downloads

Specifications

Amplifiers
low-frequency signal source with amplifier
Parameter Value
Supply Voltage 115V or 230V +10/-15%, 50/60Hz
Operating Temperature 10°C - 40°C
Frequency range 10Hz - 250kHz
Signal power 100W (nominal)
Signal level 0.001V - max. 7Vrms (14Vrms)
Signal current Max. 15A rms
Harmonic Distortion (THD) less than -20dBc at 100W power 0.5ohm
General Data
Technical Details
Parameter Value
Dimensions 19"/6HU (555mm x 448mm x 286mm)
Weight Approx. 36kg

Test Equipment Description

EM Test CWS 500N3 Application:

CWS 500N3 - Testing of ripple noise and magnetic fields

Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests.
The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.
Standards:
  • Chrysler CS-11979
  • DaimlerChrysler DC-10614
  • DaimlerChrysler DC-10615
  • DO 160 Section 18
  • Fiat 7.Z0450 (2004)
  • Ford EMC-CS-2009.1
  • Ford FMC1278
  • GMW 3097 (2006)
  • ISO 11452-10
  • ISO 11452-8
  • Jaguar EMC-CS-2010JLR V1.1 (2011-01)
  • MIL STD 461 D CS 101
  • MIL STD 461 D CS 109
  • MIL STD 461 D RS 101
  • MIL STD 461 E CS 101
  • MIL STD 461 E CS 109
  • MIL STD 461 E RS 101
  • MIL STD 461 F CS 101
  • MIL STD 461 F CS 109
  • MIL STD 461 F RS 101
  • MIL STD 461 G CS 101
  • MIL STD 461 G CS 109
  • MIL STD 461 G RS 101
  • PSA B21 7110
  • Renault 36.00.808/--G
  • Renault 36.00.808/--H
  • Renault 36.00.808/--J
  • Renault 36.00.808/--K
  • SAE J1113-2
  • Tata TST/TS/WI/257
  • Volvo STD 515-0003
  • VW TL 825 66

EM Test CWS 500N3 Benefits:

Low frequency testing out of one single box - Easy, fast and reliable

The CWS 500N3 is the state-of-the-art solution in a compact single-box design to test the immunity to conducted low-frequency disturbances and low-frequency magnetic fields. The CWS 500N3 includes a LF signal generator and amplifer, a low-frequency transformer 2:1, a frequency- selective voltage/current meter and load resistors as required by the standards. For remote control via icd.control software both a GPIB and USB interface are available. icd.control software supports the test routines, controls external measuring devices and automatically generates a test report including all test data.
Operation
Front panel menu and function keys enable the user to program his test routines quickly and accurately. The cursor allows fast control of all test parameters of the programmed routine, thus test procedures are simplified and confidence is generated that every step is carried out correctly.

12 other products in the same category: