Wavecontrol SMP2 Broadband Field Strength Meter

**Please Note - These are not for sale or rent to private individuals**

The Wavecontrol SMP2 provides a full range of E-Field, H-Field and E&H Field probes covering different frequency ranges starting at 0 Hz and up to 60 GHz.Probes are plug and play and come with an individual ISO 17025 accredited calibration. All sensors are isotropic, RMS and highly accurate.

• SMP2 Reader PC Software
• SMP2 Carrying Case
• USB Cable
• AC/DC Charger
• Manual
• Calibration Certificate

• SMP2 Reader PC Software
• SMP2 Carrying Case
• USB Cable
• AC/DC Charger
• Manual
• Calibration Certificate

• WPT
• WPF3-HP 100kHz-3GHz, 0.2-1000 V/m RF electric field probe
• WPF6
• WPF8
• WPF18
• WPF40
• WPF60 Electric Field Probe, 1 MHz - 60 GHz

• WP400
• WP400-3
• WP400c
• WP50

• WPH-DC
• WPH60 Magnetic Field Probe
• WPH1000

• Measuring field strength in TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)
• Measuring and monitoring field strengths around broadcasting and radar equipment
• Measuring field strengths of cell phone transmitters and satellite communications systems to demonstrate compliance with human safety standard limit values
• Measuring field strengths in the industrial environment, such as plastics welding equipment, RF heating, tempering, and drying equipment
• Measurements for protecting users of diathermy equipment and other medical devices that generate high-frequency radiation
• Measuring field strengths as part of general safety regulations
• 3-in-1 Field Meter: spectrum analysis (DC – 400 kHz), broadband (DC - 60 GHz) and static field measurements.
• Real-time FFT-based spectrum analysis using digital processing.
• Weighted Peak Method (WPM) for automatic and real time comparison with limits.
• Special auto-gain function for peak detection (indispensable for procedures such as welding).
• Display of results in RMS and peak values.
• Function for time domain measurement of a specific frequency.
• Automatic field probe recognition.
• E&H field selection.
• Total field value and value for each component (X, Y, Z).
• Frequency SPAN selection.
• High Pass Filters at 1 Hz, 10 Hz, 25 Hz and 100 Hz.
• Max-hold function.
• Display of maximum, minimum and average values.

• Sliding window function according to standards.
• Spatial average function.
• Adjustable measurement time from 1s to 100 hours.
• Programmable measurement to start at a given time.
• Graphic display of broadband measurement changes over time.
• Adjustable graph display from 1 s to 12 minutes.
• Programmable alarm function.
• USB and fibre optics connection.
• Large storage capacity.
• Screen-shot function for reporting.
• PC software for control and reporting.
• Results can be uploaded automatically to a web-page control centre.
• Available in several languages.