Description
Com-Power model PAL-010 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 100 Hz to 30 MHz.. It has gain of 28 dB gain . Therefore, It amplifies the signals that were previously hidden below the receiver noise floor of the EMI receiver so that it can be seen and measured. The PAL-010 has a gain variation of ±2.5 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.
Com-Power PAM-103 Features:
- Frequency: 100 Hz - 30 MHz
- Application: EMI / EMC Measurements
- Gain: 28 dB
- Gain Flatness: ± 2.5 dB
- Impedance I/O: 50 Ohms
- Connector Type: BNC (f)
- Power: 15 VDC, 500 mA
- Battery Pack: 2 x 6 V NimH Battery packs
- Size: (L x W x H) 7.5" x 5" x 3" (9 x13 x 7.6 cm)
- Weight: 3.3 lbs. (1.5 kg)
Videos
Custom Field
Weight 3.3 lbs. (1.5 kg)
Application/Test Type Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Battery Battery Pack: Two 6 V, 0.7 A NimH
Connector BNC (f)
Dimensions 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
Flatness (+/-) 2 dB
Frequency Range 100 Hz - 30 MHz
Gain 28 dB
Impedance 50 Ohms
Input Max. DC Input 10 VDC, 2 dBm
Input Power 12 VDC, 500 mA