Ring Wave Immunity Generators

Quick Links

Information

Viewed products

Rent Haefely PIM 110 Ring Wave Generator per EN/IEC 61000-4-12

Used

  • Floating high voltage output
  • Ring wave 0.5us - 100kHz (voltage & current)
  • 7.8kV impulse voltage 12Ω, 30Ω and 200Ω source impedance
  • Impulse voltage & current monitors
  • Accurate phase angle synchronization

More details

Typically In Stock

Request Quote/More Info

Specifications

Ringwave 0.5 μs/100 kHz
Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
ParameterValue
Pulse voltage (open circuit)0.20 – 7.8kV ±10%
Test duration5 seconds
Impedance12, 30 & 200 Ohms
PolarityPositive. negative, alternating
Pulse repetition12 per minute
Phase synchronization1° steps ±1° @50Hz
General Data
Technical Details
ParameterValue
Dimensions45 x 17 x 57 cm (W x H x D)
Weight44 lbs (29 kg net weight)

Test Equipment Description

Haefely Ring Wave Generator Includes:

  • Qty. 1 PSURGE8000 Mainframe
  • Qty. 1 PIM 110 Impulse Module
  • Qty. 1 PCD 100 Single Phase Coupling Decoupling Network
  • Qty. 1 HV DC Bus cable 1m
  • Qty. 1 HAEFELY HIPOTRONICS Bus cable 0.5m
  • Qty. 1 Earth bonding cable 1m
  • Qty. 1 Earth bonding cable 0.25m
  • Qty. 1 Users Manual
  • Qty. 1 Calibration Certificate (Inquire for ISO 17025)

Haefely PIM 110 Module Description:

IEC 61000-4-12 and ANSI C62.41 describe a Ring Wave generator for application on power lines in a protected environment. The Haefely PIM 110 High Voltage connections are all linked into the System Safety Concept which prevents high voltage plugs or cables from exposing operators to potentially lethal voltages. This concept is extended to Coupling/Decoupling Networks (CDNs) connected to the PIM 110 output. PIM 110 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power lines. Single and three phase CDNs have multiplexed inputs, allowing up to 3 impulse modules to be connected. A full suite of test impulses can then be performed completely automatically and without the need to power down an  reconnect the EUT. PSURGE 8000 Surge Platform can perform all the programming functions required to perform IEC and ANSI testing without the need of a control computer. Voltage and Current monitor circuits enable quick and easy verification of the impulse shape and amplitude. In addition, peak measurement circuits are used to help determine EUT PASS/FAIL criterion.

Benefits:

International application –Specifically designed to meet and exceed the requirements of IEC, EN, and ANSI tests for power line applications.

Accurate Impulse Synchronisation – The PIM 110 impulses can be applied to the AC power wave with ± 1° accuracy.

Safe and Easy – The interlocked HV section and the integrated controller allow your operators to test safely and easily.

Sturdy and Reliable – Careful component selection ensures that the PIM 110 will continue to operate under the most strenuous testing regime.

Report Generation – The unit can automatically generate test reports without a computer. Add WinFEAT&R control and reporting software to collect and collate data in any format you like.

Perform tests as you really want – Because the EUT requires a CDN to enable coupling of the Surge impul se, PIM 110 pulses are guaranteed to be within the stand ard specification at the point where an EUT connects to the test system

Application:

Haefely PIM 110 Module Includes:

  • Qty. 1 PSURGE8000 Mainframe
  • Qty. 1 PIM 110 Impulse Module
  • Qty. 1 HV DC Bus cable 1m
  • Qty. 1 HAEFELY HIPOTRONICS Bus cable 0.5m
  • Qty. 1 Earth bonding cable 1m
  • Qty. 1 Earth bonding cable 0.25m
  • Qty. 1 Users Manual

Accessories:

WinFEAT&R
Control and reporting software. Runs under windows 98, NT, ME, 2000, XP
Rack Mounting
Modules can be rack mounted for greater mechanical stability and mobility.

Associated EMC Test Equipment

13 other products in the same category: