Standards Categories
Standards Test Equipment
-
EM Test PFM 200N100.1 Automotive Power Fail Simulator for Power Supply and Data Lines
SKU: 10479
Test Standards: LV 124/LV 148, LV 123Inquire for Availability -
Teseq NSG 3060-ITU Transient Generator for Surge, Telecom, EFT/Burst, IEC and ITU-T.K
SKU: 10406
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 264 VoltsMax EUT AC Current (w/ Built in CDN): 16 AmpsInquire for Availability -
3ctest CDN 405AF8 Surge Coupling/Decoupling Network for Data Lines
SKU: 30092
Application/Test Type: Test low-speed communication lines against lightening surge as per figure 12 in IEC/EN61000-4-5 edition 3Coupling: 4 pair unshielded assymetric linesCurrent Rating: Max 1 AImpedance: 200Ω ±5%Inductors: 20 mH DecouplingInquire for Lead Time -
Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System
SKU: 11156
Phase synchronization: 3Voltage Rating: 45 kvDual Range VAC: 150 V and 300 VDual Range VDC: 200 V and 400 VWeight: 522 kgInquire for Availability -
Teseq NSG 4070B Conducted & Radiated Immunity Test System
SKU: 11159
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): up to 1,000 V/mBCI Test Levels (w/ built-in amplifier): Up to 300mATypically In Stock -
Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: sku-598
Weight: 30 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesFrequency Range: 150 kHz to 30 MHzInductors: 50 µH$6,495.00 -
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-159
Frequency Range: 150 kHz to 80 MHzRF Input Voltage: 15 V -
3ctest TSS-2430 Vehicle Mounted Multimedia Voltage Disturbance Simulation Generator
SKU: sku-1688
Test Standards: VW 80972Applications: Automotive EMC TestingInquire -
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines
SKU: 0481
Weight: approx. 2 kg netCoupling: Decoupling elements Resistors 200 OhmDimensions: 30 x 20 x 16 cm (w x h x d)DUT current: Current on EUT lines max. 0.1APulse amplitude: max. 6.6kV$250.00 - $1,500.00In Stock -
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 10161
Weight: 550 grams (1800 grams with storage case)Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication linesCommon Mode Impedance: 150 Ω ±20 ΩCurrent Rating: 600 mA (line), 1200 mA (pair)Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dBT -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHz -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random