Standards Categories
Standards Test Equipment
-
Amplifier Research 25A250B RF Power Amplifier
SKU: 5167
Frequency range: 10 kHz - 250 MHzPower Output: ~25 watts P1dBApplications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking$570.00 - $975.00In stock -
Schwarzbeck NNBM 8124-200 Single Path Vehicle AMN (LISN)
SKU: 41411
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637Max EUT DC Voltage: 1,000 VoltsMax EUT Current: 200 AmpsMax. Voltage (AC 400 Hz): 300 V$49.00 - $950.00IN STOCK -
CALL FOR LEAD TIME -
Inquire for Lead Time -
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: 10878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHz$295.00 - $3,965.00Typically In Stock -
Solar 7054-2 EMI Voltage Spike Generator
SKU: 30184
Test Standards: DO-160 SECTION 17, MIL-STD-462Applications: EMI/EMC For Military Aircraft And AviationSpike Amplitude: 10 - 400 VoltsSpike Repetition Rate: 0.8 - 10 Pulses Per SecondSpike Rise Time: 10 microseconds$1,750.00 - $1,950.00IN STOCK -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
ISO 11452-8 Magnetic Field Immunity Test System
SKU: 10463
Frequency Range: 15 Hz to 150 kHz.Normative References: ISO 11452-1, Road vehiclesOptional: Artificial NetworksMagnetic Field Strengths: up to 1,000 A/mInquire for Lead Time