Rent Teseq NSG 3060 for Surge, EFT/Burst, Dips/Interrupts, and Ring Wave up to 6.6 kV

Teseq

Write a Review
SKU:
sku-182
$0.00
Condition:
Refurbished
$0.00

Description

The Teseq NSG 3060 Modular Transient Generator For Conducted Immunity Testing is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards. The Teseq NSG 3060 system is designed to fulfill conducted EMC test requirements for CE mark testing and ANSI C62.41, including Combination Wave Surge (6.6 kV), Electrical Fast Transient (EFT) pulses (4.8 kV), Ring Wave (6.6 kV), and Power Quality Testing (PQT). Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests.

Teseq NSG 3060 Features:


Featuring an innovative modular design, the Teseq NSG 3060 is a versatile system that can be configured for basic testing needs and expanded to meet the needs of sophisticated test laboratories. Teseq’s well proven “Master-Slave” architecture enables individual pulse modules to be calibrated separately, with calibration data and correction factors stored on the slave controller. New modules can be easily installed with no need to return the entire system for calibration.

Depending on your exact testing needs, different models are available to ensure the NSG 3060 is configured to your exact testing requirements.

Rental Teseq NSG 3060 Includes

  • Teseq NSG 3060 Mainframe with 6kV Surge, 4kV EFT and Voltage Dips
  • Interlock Connectors
  • Single Phase Coupling/Decoupling Network
  • EUT Power Cable
  • AC Mains
  • User Manual
  • Calibration Documentation

Videos

Extra Information

Brand:
Teseq
Test Capabilities:
Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations
Standards Met:
IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29
Applications:
CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
Max EUT AC Voltage (w/ Built in CDN):
264 Volts
Max EUT AC Current (w/ Built in CDN):
16 Amps
Max EUT DC Voltage (w/ Built in CDN):
220 Volts
Max EUT DC Current (w/ Built in CDN):
10 Amps
EFT/Burst Pulse Output Capability:
±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA
Combination/Wave Surge Output Capability:
±200 V to 4.4 kV (in 1 V steps)
External Coupling:
Data Lines (EFT & Surge), 3PH EUT
Coupling:
ANSI / IEC / external
Coupling-2:
ANSI / IEC / external
Dips, Interrupts & Variations:
From EUT voltage input to 0 V, 0%
Impedance:
12/30/200 Ω
Phase synchronization:
asynchronous, synchronous 0 to 359º (in 1º steps)
Phase synchronization-2:
asynchronous, synchronous 0 to 359º (in 1º steps)
Phase synchronization-3:
asynchronous, synchronous 0 to 359º (in 1º steps)
Polarity:
positive / negative / alternate
Polarity-2:
positive / negative / alternate
Pulse current (short circuit):
±16.6 to ±550 A, ±10%; ±6.6 to ±220 A, ±10%; ±1 to ±33 A, ±10%
Pulse repetition:
10* s, up to 600 s (in 1 s steps) * see datasheet for derating info
Pulse voltage (open circuit):
± 200 V to 6.6 kV (in 1 V steps)
Repetition time:
40 μs to 35 min, 1 to 99’999 cycles
Test duration:
1 s to 1000 h
Test duration-2:
1 s to 70’000 min, 1 to 99’999 events, continuous
Test duration-3:
1 to 9999 pulses, continuous
Burst (EFT) 5/50 ns:
Pulse conforms to IEC/EN 61000-4-4
Burst frequency:
100 Hz to 1000 kHz
Burst time:
1 μs to 1999 s, single pulse, continuous
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse):
Pulse conforms to IEC/EN 61000-4-5
Coupling-3:
ANSI / IEC / external
Dips, Interrupts & Variations-2:
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Event time:
20 µs to 1999 s, 1 to 300 cycles or 1 to 3’000 1/10 cycles
Impedance-2:
2/12 Ω
Phase synchronization-4:
asynchronous, synchronous 0 to 359º (in 1º steps)
Polarity-3:
positive / negative / alternate
Pulse amplitude:
±200 V to 4.8 kV (in 1 V steps) - open circuit; ±100 V to 2.4 kV (50 Ω matching system)
Pulse current (short circuit)-2:
±100 A to 3.3 kA
Pulse repetition-2:
10* s, up to 600 s (in 1 s steps) * see datasheet for derating info
Pulse voltage (open circuit)-2:
±200 V to 6.6 kV (in 1 V steps)
Repetition time-2:
1 ms to 4200 s (70 min)
Ringwave 0.5 μs/100 kHz:
Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
Switching times:
1 to 5 μs (100 Ω load)
Test duration-4:
1 to 9999 pulses, continuous
Uvar with optional variac:
depending on model (VAR 3005)
Uvar with step transformer:
0, 40, 70, 80% (INA 650x)

Warranty Information

Datasheet

User Manual

    1 Reviews

  • Posted by Derek Walton on Feb 10, 2024

    5

    Equipment Rental

    I own the NSG 3060 and needed a second instrument while my first was committed to another project. The rental instrument functioned exactly the same as my own instrument and performed flawlessly during testing. The EMC Shop were most helpful in getting me the instrument in a timely fashion and at the best rental rate.