Line Impedance Stabilization Networks (LISN's)

Isolate your DUT (device under test) and provide a stable impedance during your conducted emission testing. Use a line impedance stabilization network (LISN) for pre-compliance evaluation or certification testing for IEC/EN, Mil-STD and other internatinal compliance standards.

Line Impedance Stabilization Networks (LISN's) There are 54 products.

Subcategories

  • MIL-STD-461 LISN's

    The EMC Shop specializes in MIL-STD-461 and other military compliance testing. Stocking sets of LISN's rated for up to 200 amps, customers can rent or buy line impedance stabilization networks for MIL-STD-461 online, and receive the equipment to begin testing immediately.

  • CISPR 16 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease CISPR 16 LISN's - Line Impedance Stabilization Networks. 

  • CISPR 25 / ISO 7637 Automotive LISN's

    The EMC Shop specializes in automotive emissions compliance testing and evaluation. Rent, buy or lease CISPR 25 / ISO 7637 Automotive  - Line Impedance Stabilization Networks. 

  • RTCA / DO-160 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease RTCA / DO-160 LISN's - Line Impedance Stabilization Networks. 

  • ANSI C63.4 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease ANSI C63.4 LISN's - Line Impedance Stabilization Networks. 

  • FCC Part 15 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease FCC Part 15 LISN's - Line Impedance Stabilization Networks.

  • Impedance Stabilization Networks (ISN's)

    Impedance stabilization networks (ISN's) are similar to LISN's but used for conducted emissions measurements on signal and data lines. They differ from LISN's in that they can perform Comon-Mode impedance measurements. CISPR 22 and CISPR 32 are common standards requiring the use of an ISN.

    ISN's are referred to as an asymmetric artificial network (AAN) in CISPR 16-1-2.

per page
Showing 1 - 12 of 54 items
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Typically Stocked
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency range of 10 kHz to 10 MHz
    • Fully compliant with MIL-STD 461
    • 100 Amp(AC) (forced air cooling)
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Typically In Stock
    Request Quote/More Info
    • 9kHz-30MHz 
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    $1,995.00
    Typically In Stock
    Request Quote/More Info
    • 9 kHz a 30 MHz frequency range
    • 32 Amps max output current
    • Large baseplate for optimal grounding
    • Built-in, selectable, 150 kHz high pass filter
    • Artificial Hand circuit
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Typically Stocked
    Request Quote/More Info
    • Price is for a pair of LI-3100 line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461F/CISPR 25/ CISPR 16-1-2
    • 100 Amp AC (forced air cooling)
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Typically in Stock
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty on New Units
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Price is for a pair of LI-550A LISN's
    • Fully compliant to CISPR 16-1-2 / CISPR 25
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency Range: 150 kHz to 30 MHz
    • Integral Transient Limiter/10 dB Attenuator with
    • ON/OFF (bypass) Switch
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Dual-Conductor Network with Universal Power
    • Receptacle to accept any EUT Plug
    • 20 Amps Current Handling Capability
    • Three-Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Frequency range of 150 kHz to 30 MHz
    • Price is for a pair of LI-1100C line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Fully compliant to RTCA DO-160 / MIL-STD 461D
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
Showing 1 - 12 of 54 items