Description
The SS6G-25 is a linear GaN RF amplifier features instantaneous bandwidth from 800 MHz to 6 GHz. This Class AB GaN amplifier provide a minimum of 25 watts of output power (P1dB) with a gain of 44 dB. Suitable for radiated immunity system upgrades to achieve higher field srengths or extend frequency capability from 1 or 3 GHz to 6 GHz such as in IEC/EN 61000-4-3.
The RF amplifier has 2-Tone Intermodulation of greater than 30 dBc and Harmonics greater than 20 dBc. It requires a 100 - 240 AC voltage to operate. The amplifier can be used with a wide range of modulation standards and has built-in protection circuits and therefore provides high reliability.
SS6G-25 Features:
- 25 Watts CW Min P1dB
- 800 MHz - 6 GHz
- Class AB linear GaN design
- Built in protection circuit
- Suitable for all single channel modulation standards
- Ethernet RJ-45 TCP/IP, RS422/485, GPIB (Remote Bluetooth App)
- Touch Screen - Digital Monitor & Control FWD, REV, VSWR, GAIN, ALC, V & I, TEMP
SS6G-25 Interface:
- ONLINE/STANDYBY: HPA ON/OFF.
- Watt/dBm: OUTPUT POWER UNIT.
- TABLE: HPA State Table.
- ALC: Auto Level Control.
- FAULT: Display alarm messages.
- COMM: Set the communication method.
- Display Forward Output Power dBm or W.
- Output Power Unit dBm or W.
- Display Reflected Output Power dBm or W.
- Display VSWR Value.
- Display Fault or Clear State.
- Display Standby or Online State.
- Display Output Power Average or Peak.
Videos
Custom Field
Weight 10 kg (22 lbs)
Dimensions 42.5 x 8.8 x 56 cm (16.7 x 3.5 x 22 in)
Flatness ±1.5 dB Max
Frequency Range 800 MHz - 6 GHz
Gain 44 dB minimum
Impedance 50 ohms
Input 100-240 VAC, 300 watts
Output POWER OUTPUT @ 1dB COMPRESSION:
Typical: 25 watts typical
50 Watts MAX SATURATION
RF Connector Type N female
RF Input Voltage 1.0 milliwatt maximum for rated output