> Compliance Standards>International Compliance Standards (IEC/EN)>EN/IEC 61000-4-3
EN/IEC 61000-4-3

The EMC Shop will configure a turnkey test system to allow for radiated immunity and susceptibility to any field strength and any frequency range inside or outside the IEC 61000-4-3 requirement. Rent or purchase, new or used, EMC testing equipment to certify and comply to EN/IEC 61000-4-3: Radio Frequency (RF) Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment

EN/IEC 61000-4-3 There are 46 products.

Subcategories

  • IEC 61000-4-3 Power Amplifiers

    The EMC Shop stocks a vareity of amplifiers to match customers field strength requirements and budgets from low power multi-amp solutions to a single band power amplifier covering 80 MHz - 6 GHz. RF Amplifiers up to 18 GHz can be acquired for extended frequency testing.

  • IEC 61000-4-3 Field Generating Antennas

    The EMC Shop stocks a variety of active antennas for generating the field strengths as per IEC 61000-4-3. Application support personnel can make recommendations for single broadband antennas to higher gain narrowband antennas. Contact us now for stock status on and support to identify the right antenna for your field generating requirements.

  • IEC 61000-4-3 RF Signal Generators

    The EMC Shop stocks an assortment of RF signal generators suitable for IEC 61000-4-3 and can be used for other testing including RF conducted tests per IEC 61000-4-6, ISO 11452-4 and others.

  • IEC 61000-4-3 Isotropic Field Sensors

    The EMC Shop is the only stocking distributor of isotropic field sensors for IEC 61000-4-3 and other radiated immunity testing and e-field monitoring. Complete turnkey systems available for rental or purchase to get your facility equipped for precompliance testing immediately.

per page
Showing 1 - 12 of 46 items
  • Quick view
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 1 MHz to 6 GHz
    • Linear measurement range -45 to +20 dBm
    • RMS power using log detector
    • Low voltage detection
    • For use with Teseq ITS 6006 or direct connection to USB
    • Metal casing, ruggedly designed
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Test Systems in stock, available to ship today
    • Field Strength Capability: 30 V/m
    • GTEM for DUT up to 8" x 8" x 6" (Inquire for larger GTEMs)
    • All Test Equipment to generate and monitor testing to IEC 61000-4-3
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 4 kHz to 1 GHz
    • 3 power meter inputs 4 kHz to 1 GHz
    • Integrated class A power amplifier module:
      Multiple EUT monitoring options
      • 45 W, 9 kHz to 1 GHz
    • 5,7“ TFT color display
    • Internal, menu-based control software
    • Basic remote control software and report generator included
    • Optically decoupled remote control
    • Whisper mode
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Up to 60 dB dynamic, single range
    • 0.14 to 140 V/m (300 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.2 dB typical)
    • Up to 40 meters communication by Fiber Optic Cable
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Extremely lightweight: 22 grams only!
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • EMC RF Generator
    • USB RF Power Sensor 6630
    • Field Probe EP-60x
    • Fiber Optic Adapter 6630FOA
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 80 MHz - 6 GHz
    • Maximum Continuous Power: 5,000 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 2.0:1 (Max: 3.0:1) 
    • Max Radiated Field: 1,000 V/m
    • Power Gain (over isotropic): 6 dB
    • Gain Flatness: ±1.5 dB 
    • Pattern Type: directional
    • Connector: N-Type, C-Type, 7-16, 1-5/8 EIA (female)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 190 MHz - 7 GHz
    • Maximum Continuous Power: 400 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 1.7:1 (Max: 3.4:1 at 190 MHz; >2.1:1 at 6 to 7 GHz) 
    • Max Radiated Field: 100 V/m
    • Pattern Type: directional
    • Connector: N-Type female
    • Individually Calibrated (1, 3 and 10 Meter calibration included, horizontal polarization)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 0.5 V/m to 800 V/m
    • +/- 2 dB Flatness
    • Laser powered
    • Small size permits use in TEM cells and is less disruptive to the RF field
    • User friendly interfaces with the FM7004 field monitor and/or VM7000 virtual monitor software
    • USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
    • Automatic Temperature compensation
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 kHz to 9.25 GHz
    • Up to 60 dB dynamic, single range
    • 1.5 to 1,500 V/m (3,000 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 1 V/m to 1,000 V/m
    • +/- 1.8 dB Flatness
    • Laser powered
    • Small size permits use in TEM cells and is less disruptive to the RF field
    • User friendly interfaces with the FM7004 field monitor and/or VM7000 virtual monitor software
    • USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
    • Automatic Temperature compensation
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 46 items