EM Injection Clamps

Equipment & Materials

EMC Manufacturers

Shop by Brand

EM Injection Clamps

Overview
Standards
Using
Videos

EM Injection clamps are used to inject a known level of RF signal onto the cabling of EUT at a test frequency and verify the EUT still performs accordingly. The EMC Shop stocks EM injection clamps for RF conducted immunity testing, typically for IEC 61000-4-6. Rent or buy individual EM injection clamps or order a complete turn key system. Calibration adapters are also available upon request.

Get Application Support, Pricing, Lead Time and More: Contact Form

Standards Using EM Injection Clamps

IEC 61000-4-6: international standard for most commercial electornics
IEC 60533: EMC for ships with a metallic hull
CISPR 24: Immunity requirements for information technology equipment (ITE)
IEC 60601-1-2: EMC requirements for medical equipment
IEC 61326-1: Immuniy and emissions for electrical equipment

EM Clamp Test Setup per IEC 61000-4-6

EM Coupling Injection Clamp Test Setup per IEC 61000-4-6

EM Injection Clamp Video Overview

Com-Power
|
sku: sku-524-1

Com-Power CLEM-6146 RF Injection Device for Conducted Immunity

Standards: EN/IEC 61000-4-6

Frequency Range: 10 kHz to 1000 MHz

Maximum Continuous Power: 10 kHz to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
MSRP:

Now: $11,780.00
Add to Cart
sku: sku-2132

EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Frequency Range: 10 kHz to 1000 MHz

Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
Add to Cart
EM Test
|
sku: sku-1881

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Frequency Range: 10 kHz to 1000 MHz

Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min

Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
Add to Cart
FCC
|
sku: sku-727

Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6

Application/Test Type: ferrite decoupling clamp

Frequency Range: 100kHz - 100MHz

Standards Met: IEC/EN 61000-4-6
Add to Cart
FCC
|
sku: sku-726

Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Frequency Range: 10kHz - 1GHz

Maximum Continuous Power: 100 watts CW for 15 minutes

Standards Met: IEC/EN 61000-4-6;
Add to Cart
sku: sku-524

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

Standards: EN/IEC 61000-4-6

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Frequency Range: 10 kHz to 1000 MHz

Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
Add to Cart
Noiseken
|
sku: sku-296

Rent Noiseken CA-805B Coupling Adapter for Noise Injection
MSRP:

Now: $295.00
Add to Cart
Teseq
|
sku: sku-119

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Frequency Range: 10 kHz to 1000 MHz

Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min

Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
Add to Cart