Amplifier Research Categories
Amplifier Research Test Equipment, Systems & Solutions
-
Amplifier Research 1000W1000G RF Amplifier 80MHz - 1000MHz, 1000 Watts CW
SKU: sku-2173
Max Frequency: 1 GHzMin Frequency: 80 MHzOutput Power: 1000 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: IEC 61000-4-3, ISO 11451-2, MIL-STD 461, DO-160Gain: 60dBAC Input Power: 200-240V/1PH/4kVACooling: Forced AirRENTAL ONLY -
Amplifier Research 100A250A RF Amplifier for BCI Testing
SKU: sku-1306-1
Max Frequency: 250 MHzMin Frequency: 10 kHzOutput Power: 100 WattsApplications: RF Conducted Immunity, BCI Testing, MilitaryStandards: MIL 461 CS 114, IEC 61000-4-6Gain: 50 dBAC Input Power: 120V/1PHTypically In Stock -
Amplifier Research 40/5S1G11 Dual-band Amplifier 700 MHz - 10.6 GHz
SKU: sku-2203-1-1
Max Frequency: 10.6 GHzMin Frequency: 700 MHzOutput Power: 40/5 WattsApplications: Radiated Immunity, Automotive, MedicalStandards: IEC 61000-4-3Gain: 46/40 dBAC Input Power: 120V/1PHTypically In Stock -
Amplifier Research 2500A225B High Power Low Frequency RF Amplifier
SKU: sku-1314-1
Max Frequency: 225 MHzMin Frequency: 10 kHzOutput Power: 2500 WattsApplications: RF Conducted Immunity, MedicalStandards: IEC 61000-4-6, MIL-STD 461 CS114AC Input Power: 380-415V/3PH/8.5kVAGain: 64 dBConnector Type: 7/16 DINTypically In Stock -
Amplifier Research 350S1G6 0.7-6 GHz High Power Amplifier
SKU: sku-2203-1
Max Frequency: 6 GHzMin Frequency: 700 MHzOutput Power: 350 WattsApplications: Radiated Immunity, Automotive, MedicalStandards: IEC 61000-4-3Gain: 57 dBAC Input Power: 230V/1PH/3.8kVARF Connector: 7/16 DINInquire for Availability -
Amplifier Research DC3400 10 kHz to 400 MHz Directional Coupler for BCI Testing
SKU: sku-2045-1
Max Frequency: 400 MHzMin Frequency: 10 kHzCoupling Value: 40 dBMax Power Handling: 200 WattsConnectors (Main Line): N(f)Connectors (Coupling Line): Nf)VSWR: 1.30:1 -
Amplifier Research 50S1G4A Solid-State Amplifier, 50 Watts CW, 0.8 - 4.2 GHz
SKU: sku-2204
Weight: 100 lbs.Dimensions: 50.3 x 24.9 x 54.6 cm 19.8 x 9.8 x 21.5 inFlatness: Small Signal Flatness:±1.5 dB typical ±2.0 dB maximumFrequency Range: 0.8 – 4.2 GHzImpedance: 50 ohmsInput: Input for Rated Output 1.0 milliwatt maximumOutput: POWER OUTPUT @ 1dB COMPRESSION Nominal 70 watts Minimum 50 wattsRF Connector: Type N female -
-
AR AS01018 Electromagnetic Field Immunity Test System
SKU: sku-2177
Generic Standards: IEC 61000-6-1, IEC 61000-6-2Test Standards: IEC 61000-4-3Frequency Range: 80 MHz - 6 GHzField Strength: up to 30 V/mTypically In Stock -
AR 1 GHz Radio Frequency Immunity Test Rack
SKU: sku-2176
Test Standards: IEC 61000-4-3Frequency Range: 80 MHz - 1 GHzField Strength: up to 100 V/mGeneric Standards: IEC 61000-6-1, IEC 61000-6-2In Stock -
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: sku-2103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing -
Amplifier Research 150U1000, 10 kHz - 1 GHz RF Amplifier Rental
SKU: sku-2092
Frequency range: 10 kHz - 1 GHzWeight: 130 LbsDimensions: 19.8 x 11.2 x 29.5 inFlatness: ±1.5 dB typical, ±2.0 dB maximumFrequency Range: 10kHz-1000MHzGain: 52 dB minimumImpedance: 50 ohmsInput: 1.0 mW maximumOutput: 170 watts typical, 150 watts minimumRF Connector: Type N femaleRF Input Voltage: 1.0 milliwatt maximum for rated output