Teseq Absorbing Clamps / Ferrite Tube

Shop by Category

Shop by Brand

Teseq Absorbing Clamps are used for measuring interference signals on power supply cables. Decoupling clamps and ferrite tube are available for a variety of different EMC applications.

Quick view Details

sku: sku-1881

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

View Details
Quick view Details

sku: sku-1038

Montly Rental TESEQ AMZ 41 Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

View Details
Quick view Details

sku: sku-559

Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

View Details
Quick view Details

sku: sku-141

Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable

View Details
Quick view Details

sku: sku-140

Teseq CMAD 10 Common Mode Absorption Device for CISPR 22

View Details
Quick view Details

sku: sku-119

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

View Details
Quick view Details

sku: sku-77

Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

View Details

Quick view

sku: sku-1881

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

Rent, buy or lease the EM Test / Luthi EM101 EM Injection Clamp for IEC/EN 61000-4-6. The EMC Shop stocks turnkey systems to test RF conducted immunity. EM Injection Clamp For IEC / EN 61000-4-6 IEC 61000-4-6 (EN 61000-4-6) defines three basic types of...

Add to Cart
Quick view

sku: sku-1038

Montly Rental TESEQ AMZ 41 Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

The AMZ 41 clamp mites were designed to measure radio interference emitted by electrical devices through their connecting wires. The method of measuring with absorbing ticks (ACMM) is described in Clause 7 of CISPR 16-2-2. Absorbing mites are described...

Add to Cart
Quick view

sku: sku-559

Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

Teseq MDS 21B Description: In connection with a measuring receiver according to CISPR 16-1-1, the absorbing clamp MDS enables to measure the interference capability of radio interferers, such as domestic appliances, electric tools etc. directly; viz. by...

Add to Cart
Quick view

sku: sku-141

Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable

Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can be...

Add to Cart
Quick view

sku: sku-140

Teseq CMAD 10 Common Mode Absorption Device for CISPR 22

Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can be...

Add to Cart
Quick view

sku: sku-119

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

EM Clamp For IEC / EN 61000-4-6 IEC 61000-4-6 (EN 61000-4-6) defines three basic types of transducer used for the injection of test signals into the equipment under test (EUT). The basic requirement is to inject a known level of RF signal onto the cable...

Add to Cart
Quick view

sku: sku-77

Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

Teseq (Schaffner) AMZ 41 Description: Designed for CISPR 14 testing. For the newer version of the AMZ 41 see the link below for the Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

Add to Cart