ANSI (IEEE) C62.45

(Showing 2 of 2)

ANSI (IEEE) C62.45: Surge Immunity Equipment Connected to Low-Voltage AC Power Circuits

  • Haefely

    SKU: sku-544

    Haefely PIM 110 Ring Wave Immunity System for IEC 61000-4-12

    Weight: 44 lbs (29 kg net weight)
    Dimensions: 45 x 17 x 57 cm (W x H x D)
    General Data: Technical Details
    Impedance: 12, 30 & 200 Ohms
    Phase synchronization: 1° steps ±1° @50Hz
    Polarity: Positive. negative, alternating
    Pulse repetition: 12 per minute
    Pulse voltage (open circuit): 0.20 – 7.8kV ±10%
    Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
    Test duration: 5 seconds
    $995.00
  • Teseq

    SKU: sku-219

    Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

    Weight: 100 kg (220.5 lb)
    Application/Test Type: Automated Surge Testing for EUT up to 100 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
    Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)
    Dimensions: 570 x 840 x 630mm (22.4 x 33 x 24.8")
    Frequency Range: DC – 65 Hz with no loss, 400 Hz max. with power loss
    Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
    Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41
    Voltage Rating: EUT VAC line to line: 30 to 480 VAC rms; EUT VAC line to ground: EUT VAC 30 to 280 VAC rms, (below 30 V synchronisation not guaranteed, asynchronous mode only); EUT VDC: up to 125 VDC – full current range, up to 225 VDC – up to 7 A

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.