EM Test Transient Generators Categories
EM Test Transient Generators Test Equipment, Systems & Solutions
-
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6
SKU: sku-251
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 40VrmsBCI Test Levels (w/ built-in amplifier): 8VrmsFrequency Range (w/ built-in amplifier): 150 kHz - 230 MHz -
EM Test TSS 500N6B Telecom Surge Simulator
SKU: 6885
Voltage (o.c.): 50V - 600V -0/+15%, positive/negativeCurrent (s.c.): 8A - 100A per wireTest Standards: Bellcore/Telcordia GR-1089-COREPulse duration: 1,000μs +500μs/-0μsRepetition rate: 1 pulse every 36s at 600V/100A per wireIn Stock -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: sku-1292
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Was:$48,000.00$14,400.00
-
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 OhmsInput: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)Maximum Continuous Power: 80W (nominal)Standards Met: IEC 61000-4-6Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, ServiceVoltage Rating: 1 V to 30 Volts Max -
Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68
SKU: sku-776
Weight: approx. 35kgApplication/Test Type: Test levels as per FCC part 68Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PEDimensions: 19“ / 6HU,Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)Outputs: 4 mm banana socketPolarity: pos / neg / alternateRise time: Less than 2 usTelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)Trigger of bursts: Automatic pulse release -
EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A
SKU: sku-549
Weight: app. 28kg;Current Rating: Max. 32ADimensions: 19"/6 HUDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Frequency: 50Hz/60Hz, Single phase applicationOutput: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panelPeak current: Better than 500ARepetition rate: 0.01s to 9,999sRise time: Between 1us and 5us for abrupt changes, generator loaded with resistive loadSupply Voltage: 115V/230V; +10/-15%Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)Trigger of bursts: Automatic -
EM Test PFM 200N100.1 Automotive Power Fail Simulator for Power Supply and Data Lines
SKU: 10479
Test Standards: LV 124/LV 148, LV 123Inquire for Availability -
-
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Polarity: Positive, negativeRise Time: 75ns ± 20%Rise Time-2: 5 ns ±30%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Weight: 32 kg (1-phase) 50 kg (3-phase)Slow Damped Oscillatory Waves: As Per EN/IEC 61000-4-18Burst Duration: At least 2sDamping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueDimensions: 19" / 9 HU, approx. 19" / 9 HU, approx.Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18Frequency: 100 kHz ± 10%General Data: Technical DetailsImpedance: 12ohm and 30ohm ± 20%Oscillation Frequency-2: 100kHz and 1MHz ± 10%Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;Polarity-2: Positive, negativePulse repetition: 1 to 60 transients per minuteRepetition Rate: Max. 5,000 /s ±10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Rise time: 0.5 us ± 30%Source impedance: 200ohm ± 20%Spike frequency: 100kHz ± 10%Supply Voltage: 115/230V +10/-15%Test Voltage: 250 V - 6,000 V ± 10%Voltage-2: Voltage (o.c.) at HV output 250 V - 3,000 V ± 10% Voltage (o.c) at line output 250 V - 2,500 V ± 10% -
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-410
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 OhmsInput: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)Maximum Continuous Power: 80W (nominal)Standards Met: IEC 61000-4-6Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, ServiceVoltage Rating: 1 V to 30 Volts Max -
EM Test TSS 500N10 Telecom Surge Generator ITU-T for Enhanced Level Testing up to 10 kV
SKU: sku-403
Weight: approx. 37.1 kg (81.8 lbs.)AC Power Adapter: Supply voltage 115/230 V +10/-15%Dimensions: 19"/9 HU, 420 mm x 448 mm x 500 mmEnergy Storage Capacitor: 1 uF (Pulse 1.2/50 us) 20 uF (Pulse 10/700 μs) 20 uF (Surge Pulse B)Front Time: 1 us ± 30% (Pulse 1.2/50 us) 10 us ± 30% (Pulse 10/700 μs) 9 us ± 30% (Surge Pulse B)Pulse Duration: 50 us ± 20% (Pulse 1.2/50 us) 700 us ± 20% (Pulse 10/700 us) 720 us ± 20% (Surge Pulse B)Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.21 ITU-T K.28 ITU-T K.45 (and more)Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 500 V - 10,000 V ± 10%