ISO 7637

ISO 7637 Automotive EMC Compliance

The EMC Shop stock a variety of automotive ISO 7637 test equipment the different transient tests. Some of the ISO 7637 pulses are as follows. 

Pulse 1.

A simulation of transients due to supply disconnection from inductive loads; it applies to a DUT if as used in the vehicle, it remains connected directly in pa...

ISO 7637 Automotive EMC Compliance

The EMC Shop stock a variety of automotive ISO 7637 test equipment the different transient tests. Some of the ISO 7637 pulses are as follows. 

Pulse 1.

A simulation of transients due to supply disconnection from inductive loads; it applies to a DUT if as used in the vehicle, it remains connected directly in parallel with an inductive load.


Pulse 2a.

Simulates transients due to sudden interruption of currents in a device connected in parallel with the DUT due to the inductances of the wiring harness.


Pulse 2b.

Simulates transients from DC motors acting as generators after the ignition is switched off.


Pulse 3a/3b.

Occurs as the result of switching processes. The characteristics of this pulse are influenced by distributed capacitance and inductance of the wiring harness.

Pulse 4.

The voltage reduction caused by energizing the starter motor circuits of the internal combustion engines.


Pulse 4 variants.

Most manufacturer variations of pulse four are generally much more complicated. For example Ford requires up to four arbitrary generators with four outputs to be perfectly synchronized.


Pulse 5.

Simulation of a load dump transient occurring in the event of a discharged battery being disconnected while the alternator is generating charging current with other loads remaining on the alternator circuit at this moment.


Magnetic field immunity.

Simulates magnetic fields generated by electric motors, daytime running lamps, etc. for DUTs with magnetically sensitive devices.


Transformer coupled sine waves.

Sinusodial noise coupled on battery lines. Often referred to as ground shift.

Get Application Support, Pricing, Lead Time and More: Contact Form

More

ISO 7637  There are 6 products.

Subcategories

  • Pulse 1, 2a

    ISO 7637 Pulse 1

    • A simulation of transients due to supply disconnection from inductive loads; it applies to a DUT if as used in the vehicle, it remains connected directly in parallel with an inductive load.

    ISO 7637 Pulse 2a

    • Simulates transients due to sudden interruption of currents in a device connected in parallel with the DUT due to the inductances of the wiring harness.

    ISO 7637 Test pulse 1 This test is a simulation of transients due to supply disconnection from inductive loads. It is applicable to DUTs which, as used in the vehicle, remain connected directly in parallel with an inductive load.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Pulse 3a, 3b

    ISO 7637 Pulse 3a/3b

    Occurs as the result of switching processes. The characteristics of this pulse are influenced by distributed capacitance and inductance of the wiring harness.

    The EMC Shop stocks EFT generators for ISO pulse 3a/3b and variants.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Pulse 5a, 5b, 7

    Test pulses 5a and 5b

    This test is a simulation of load dump transient, occurring in the event of a discharged battery being disconnected while the alternator is generating charging current and with other loads remaining on the alternator circuit at this moment; the load dump amplitude depends on the alternator speed and on the level of the alternator field excitation at the moment the battery is disconnected.

    • The pulse shape and parameters for an alternator with no centralized load dump suppression (pulse 5a).
    • The pulse shape and parameters for an alternator with centralized load dump suppression (pulse 5b).

    The EMC shop has a variety of solutions for ISO 7637 compliance.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Pulse 2b, 4

    ISO 7637 Pulse 2b

    simulates transients from d.c. motors acting as generators after the ignition is switched off.

    ISO 7637 Pulse 4

    This pulse simulates supply voltage reduction caused by energizing the starter-motor circuits of internal combustion engines, excluding spikes associated with starting.

    Get Application Support, Pricing, Lead Time and More: Contact Form

Showing 1 - 6 of 6 items
Showing 1 - 6 of 6 items