Teseq EFT/Burst Generators

Teseq offers high end combined or single function solutions for simulating Electric Fast Transients (EFT) for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN 61000-4-4 standard. The EMC Shop stocks Teseq EFT/Burst generators, as well as EFT coupling clamps, calibration accessor...

Teseq offers high end combined or single function solutions for simulating Electric Fast Transients (EFT) for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN 61000-4-4 standard. The EMC Shop stocks Teseq EFT/Burst generators, as well as EFT coupling clamps, calibration accessories, and test tables/environments. Rent, buy or lease a turnkey test solution today. 

All models, current and previous generation, reach levels to 4.8 kV and Coupling / Decoupling Networks (CDN’s) are available for single and three phase testing up to 200 A.

Teseq EFT/Burst Generators

NSG 3040A-EFT
NSG 3040-EFT (Discontinued)
NSG 3025 (Discontinued)
NSG 2025 (Discontinued)



The Teseq NSG 3060 and NSG 3060A typically include EFT/Burst, however not a practical stand-alone solution.

Video Overview: EFT Test Setup

More

Teseq EFT/Burst Generators There are 13 products.

per page
Showing 1 - 12 of 13 items
  • Request Quote/More Info
    • Monthly Rental - Ships Immediately
    • Ideal for 3 Phase DUT IEC 61000-4-4 testing
    • For AC and DC up to 100 Amps per channel
    • EUT Supply voltage to 690 VAC and 1000 VDC
    • Parallel channels for Single Phase/DC application and increase current capability
    • Compatible with all burst/EFT generators up to 8 kV
    • Built-in temperature monitor
    Request Quote/More Info
    • Suitable for 3 Phase Burst/EFT Immunity Testing
    • EUT Current: 3 x 100/200 Amp continuous
    • EUT Voltage: 690 Volts AC RMS; 1,000 Volts DC
    • Manual CDN compatible with most transient immunity generators
    • Complies with IEC / EN 61000-4-4 edition 3.0 up to 8.8kV
    Request Quote/More Info
    • Compatible with Teseq's NSG 3040, NSG 3060 systems
    • Use with Teseq CAS 3025
    • Complies with IEC 61000-4-4 Ed 2.0 2004
    • Complies with IEC 61000-4-4 Ed 3.0 2012
    • Safety cover with interlock
    • Calibration kit per IEC 61000-4-4 Ed 3.0 2012
    Request Quote/More Info
    • Suitable for pre-compliance to IEC 61000-4-4
    • Built-in 3 Phase / 30 Amp Coupler
    • Easily Programmable
    • 100 Day Warranty
    • Fresh NIST calibration
    Request Quote/More Info
    • Monthly Rental - Ships Immediately
    • Verification/calibration kit for IEC/EN 61000-4-4, amendment 2
    • For peak voltages up to 8.8 kV
    • INA 265B: 50 Ω termination, 60 dB attenuation
    • INA 266A: 1 kΩ termination, 66 dB attenuation
    • Compatible with all burst/EFT generators
    Request Quote/More Info
    • As specified by IEC 61000-4-4 Ed3.0: 2012
    • Compatible with all types and brands of burst EFT coupling clamps
    • Consists of transducer plate and termination bracket (connecting adapter)
    • Needs additional terminations/attenuator kit CAS 3025 and scope with bandwidth >400 MHz
    Request Quote/More Info
  • The Teseq INA 3825 Data Line EFT capacitive coupling clamp cover is a product Safety cover with interlock for CDN 3425 interlock cable.

    Request Quote/More Info
    • Rent the Teseq NSG 3040-IEC System
    • Includes PQM 3403 module to perform interrupt tests
    • Fully IEC 61000-4-2, -4, -5 compliant
    • Fully IEC 61000-4-11 & -4-29 compliant
    • 16 A single phase CDN
    • Multi-function generator for immunity testing in compliance with EN/IEC 61000-4-4,5,11,29 for single phase testing up to 270 V/16 A.
    • Up to 4.4kV Surge and 4.8kV EFT/Burst testing
    Request Quote/More Info
    • Complies with and exceeds requirements of IEC/EN 61000-4-4, -5, -11, -12, -29 and ANSI C62.41 & 45.
    • Surge Combination Wave 6.6 kV
    • Surge Ring Wave 6.6 kV
    • EFT/Burst 4.8 kV
    • Dips Interrupts and Variations
    • Single phase 16 A CDN
    • 7.2" color display, touch panel, wheel with step size keys, Start-Stop-Pause keys and virtual keypad for easy and intuitive testing
    Request Quote/More Info
    • Rentals are month to month
    • PNW 2055 Combination Wave Module:
      • Voltage: 1,2/50us
      • Current: 8/20us
    • Impulse voltage: 200V - 4.4kV
    • Impedance: 2 Ohm & 12 Ohm
    • Pulse Repetition: 10s to 1000s
    • Built in coupling network, 20V to 230VAC, 16A sync or async to power line
    Request Quote/More Info
    • One box solution system
    • Surge voltage to 4.8 kV
    • EFT/Burst to 4.8 kV / 1 MHz
    • PQT to 16 A / 300 VAC & DC
    • Easy to use 7“ color touch screen
    • Parameters can be changed while test running
    • Wide range of optional test accessories
    Request Quote/More Info
Showing 1 - 12 of 13 items