CISPR 25 / ISO 7637 Automotive LISN's

The EMC Shop specializes in automotive emissions compliance testing and evaluation. Rent, buy or lease CISPR 25 / ISO 7637 Automotive  - Line Impedance Stabilization Networks. 

CISPR 25 / ISO 7637 Automotive LISN's There are 15 products.

per page
Showing 1 - 12 of 15 items
    • Artificial Network as per ISO 7637 or CISPR 25/ ISO 11452-4
    • Frequency range: 100kHz - 108MHz
    • DC voltage max. 400V
    • AC voltage max. 250V (up to 1kHz)
    • Current max. 50A AC/DC cont.
    • Insertion loss < 3dB
    • Compact design
    $3,430.00
    Request Quote/More Info
    • AN/ LISN as defined in CISPR 12, CISPR 25 and ISO 7637-2
    • HV-AN as defined in draft CISPR 12, draft CISPR 25 and draft ISO 7637-4
    • LISN as defined in RTCA/DO-160G section 20
    • 5 µH LISN as defined in MIL-STD-461F and G
    $2,410.00
    Request Quote/More Info
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-3100 line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461F/CISPR 25/ CISPR 16-1-2
    • 100 Amp AC (forced air cooling)
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote/More Info
    • 100kHz-150MHz
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    Request Quote/More Info
    • Price is for a pair of LI-550A LISN's
    • Fully compliant to CISPR 16-1-2 / CISPR 25
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote/More Info
    • 100 kHz to 108 MHz Frequency Range
    • Fully compliant with CISPR 25 / CISPR 16-1-2
    • "Air-core" inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote/More Info
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 70 (100) A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max.200 A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 400 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • LISN 5 µH || 50 Ohm
    • 70 (100) single path
    • Suitable for 600V DC and 270 V AC 890 Hz
    • Calibrated up to 400 MHz according to DO-160
    Request Quote/More Info
    • High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load
    • Impedance (5µH) || 50 Ohm
    • 70 (100) A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote/More Info
    • High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 200 A
    • 1000 V DC
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote/More Info
Showing 1 - 12 of 15 items