Automotive EMC

The EMC Shop stocks automotive emc test equipment for ISO 7637, ISO 11452, CISPR 25Ford FMC1278 and more. Absorber-lined shielded enclosures are available at competitive prices.

Automotive EMC Test Equipment Categories

RF Conducted Immunity - Bulk Current Injection (BCI) Method

Radiated Immunity Using a Stripline

Magnetic Immunity using Helmho...

The EMC Shop stocks automotive emc test equipment for ISO 7637, ISO 11452, CISPR 25Ford FMC1278 and more. Absorber-lined shielded enclosures are available at competitive prices.

Automotive EMC Test Equipment Categories

RF Conducted Immunity - Bulk Current Injection (BCI) Method

Radiated Immunity Using a Stripline

Magnetic Immunity using Helmholtz Coil

Immunity to Electrical Fast Transients

Electrostatic Discharge Immunity

CISPR 25 Radiated Emissions

Automotive EMC Testing Overview

Testing for electrical, radiated and magnetic intererence in automobiles is a growing need as the industry moves towards "Smart Cars". Domestic and foreign manufacturers will be looking for certified components to in an effort to eliminate electromagnetic interference (EMI) in automobiles. In the past there have been concerns with "runaway" vehicles and other issues where interference was a key suspect forcing the manufacuturers to do recalls.

More

Automotive EMC There are 41 products.

per page
Showing 1 - 12 of 41 items
    • LD 200N Load Dump generator for ISO 7637 Pulses 5A, 5B, 7
    • VDS 200N50 Voltage Drop Simulator for ISO 7637  Pulses 2B and 4
    • UCS 200N Auto Transient/EFT Simulator for ISO 7637 Pulses 1, 2, 3A/3B
    • Load Dump CLD Module enables the LD 200N to generate clipped load dump pulses
    Request Quote/More Info
    • Economic Alternative for Automotive EMC Compliance
    • Meets ISO 7637 Pulses 1, 2a, 3a aand 3b
    • Built-in EFT/Burst generator module
    • Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
    Request Quote/More Info
    • MT 5511 Micro Transients
    • FT 5531 Fast Transients
    • LD 5550 Load Dump Generator
    • More plug in modules are available depending on testing requirements
    • Controlled via PC with included Software
    • Built-in 100 A coupler/battery switch
    • Contains space for up to five transient modules
    • Supports USB and GPIB
    Request Quote/More Info
    • Built-in EFT/Burst generator module
    • Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
    • Built-in coupling/decoupling network, 80V/50A, 100A@500ms
    • Built-in battery switch
    • Overcurrent protection
    • USB and GPIB-Bus
    • Emergency stop
    • Software for Windows Vista & Windows 7
    Request Quote/More Info
    • Voltage up to 60V
    • Current up to 10A (peak up to 15 A)
    • Bipolar-amplifier models available
    • Low output impedance
    • Powerful DC voltage source
    • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
    • Pre-programmed test routines to simulate various supply waveforms
    • Input for external signal generator to produce most complex waveforms
    • Software for Windows Vista & Windows 7
    • USB and GPIB interfaces
    Request Quote/More Info
    • MT 5511 Micro Transients
    • FT 5531 Fast Transients
    • LD 5550 Load Dump Generator
    • Built-in 100 A coupler/battery switch
    • Contains space for up to three transient modules
    • Supports USB and GPIB
    Request Quote/More Info
    • Dual-Processor-Technology, 500kS/s sample rate
    • 4-channel arbitrary generator
    • 2-channel transient recorder
    • Simultaneous recording/generation
    • Library of standard test routines
    • Pseudo-random function
    • 60GB built-in hard disk
    • Multiple interfaces
    • Software for Windows Vista & Windows 7
    Request Quote/More Info
    • Switch for Power supply (100 A) and signal/data lines (2 A)
    • Pulses E10 and E13 of the LV 124/LV 148 standard
    • Bidirectional current direction
    • Separate switch in the ground line
    • Rise/fall time less than 200ns
    • Built in short-circuit switch <100 mohm
    • Rated voltage ±100 VDC
    • short-circuit-proof
    Request Quote/More Info
    • Built-in DDS to generate sinusoidal signals up to 250kHz
    • Built-in LF amplifier, 250W
    • Output voltage max. 140V p-p, 50V rms
    • Output current max. 5A rms
    • Programmable DC voltage offset
    • Controlled by AutoWave and autowave.control via Framebus
    • Integrated voltage measurement 10Hz - 250kHz (optional)
    • Integrated field strength measurement (optional)

    Request Quote/More Info
    • One-box transformer and 0.5 ohm load assembly
    • Frequency response 10 Hz to 250 kHz
    • Secondary saturation 50 A per transformer
    • Audio power 2 x 200 W
    • Freely configurable on primary/secondary; serial, parallel, single
    • Turns ratio 2:1 step down
    • Built-in non-inductive load resistor 0.5 ohm, 250 W
    Request Quote/More Info
    • Capacitive stability mode
    • High bandwidth up to 180 kHz
    • Fast slew rate
    • Ideal for use as synchronized auxiliary channels required by various EMC standards
    • Two gain settings for universal use
    Request Quote/More Info
    • Large inrush current capability
    • Capacitive stability mode
    • High bandwidth up to 150 kHz
    • Fast slew rate
    • Two output ranges for power efficiency
    Request Quote/More Info
Showing 1 - 12 of 41 items