-
$0.00RENTAL ONLY
-
$0.00Typically In Stock
-
Amplifier Research
SKU: sku-1076
Amplifier Research CI00400AM4 BCI RF Conducted Immunity Generator
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-STD-461 CS114, ISO 11452-4, DO-160 Section 20Applications: BCI TestingCDN Test Levels (w/ built-in amplifier): 60VrmsBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµAFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHzVideos: Software OverviewIndustries: Automotive EMC, Military & Aerospace, CE Marking$0.00Typically In Stock -
EM Test
SKU: sku-817
EM Test LD 200N Load Dump Generator for ISO 16750-2
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock -
3ctest
SKU: sku-772
3ctest TIS 700 Automotive Transient Simulator ISO 7637
Test voltage: 25 - 700 VoltsMax EUT DC Voltage (W/ Built In CDN): 60 VoltsMax EUT DC Current (W/ Built In CDN): 30 AmpsStandards Met: ISO 7637, FMC1278, Many MoreApplications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances$0.00In Stock -
Teseq
SKU: sku-157
Teseq NSG 5500 Automotive Immunity Generator
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsPre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a, 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T$0.00Inquire -
EM Test
SKU: sku-596
EM Test Automotive Test System for ISO 7637-2
Repetition rate: 0.2s - 99.0sTest Routines: Quick Start, User Defines Routines, Standards Test Routines ServiceTest voltage: 20V - 600V ± 10% (peak voltage and polarity as per selected standard)AS PER ISO 7637-2 THE FOLLOWING STANDARDS CAN BE COVERED: SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T,Burst duration: 0.1ms - 999.9msElectrical Fast Transients: EFT/Burst module for test pulses 3A/3BFreestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NISO PULSE 1 (12V): Rise time 1us +0%/-50% (10% - 90%); Pulse duration 2ms ± 10% (10% - 10%); Int. resistor 10ohm ± 10%ISO PULSE 1 (24V): Rise time 3us +0%/-50% (10% - 90%); Pulse duration 1ms ± 10% (10% - 10%); Int. resistor 50ohm ± 10%ISO PULSE 2 (12V/24V): Rise time 1us +0%/-50% (10% - 90%); Pulse duration 50us ± 10% (10% - 10%); Int. resistor 2ohm ± 10%ISO PULSE 6 (12V) AS PER ISO 7637-1:1990: Rise time 60us +0%/-50% (10% - 90%); Pulse duration 300us ± 10% (10% - 10%); Int. resistor 30ohm ± 10%Micropulse: Micropulse module for test pulses 1, 2A and 6Output-2: DUT supply +/- Central DUT output Coaxial output; port To connect the capacitive coupling clamp as per ISO 7637-3:2007Outputs: Direct Via 50ohm-coaxial connector (for tests using e.g. a capacitive coupling clamp); Coupling mode To the + battery line (supply lines); CRO trigger 5V trigger signal for oscilloscopePolarity: Positive/negative (Pulse 3b/3a)Pulse duration: 150ns ± 45nsRepetition rate-2: 10ms - 9,999msRise time: 5ns ± 1.5nsSource Impedance: 50ohmSpike frequency: 0.1kHz - 200kHzTest duration: 0:01min - 999:59minTest Routines-2: Quick Start On-line adjustable parameters, easy-to-use; Standard Test routines As per ISO 7637-2:2011, Levels 1 - 4; User Test routines Random burst release Change voltage after T Change frequency after TTest Voltage: 25V - 1,000V ± 10%Trigger: automatic, manual, external, battery switchTrigger of bursts: Automatic, manual, externalUCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200AVerification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load$0.00 -
3ctest
SKU: sku-733
3ctest APS 60C30 Automotive Power Voltage Variation Simulator ISO 7637-2 Pulse 2B/4
Input: External signal input: 0 ~ ±10vOutput: Single polarity output: 0~60VApplications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesStandards: ISO 7637 , FMC1278, ISO 16750-2 & More$0.00Typically In Stock -
AE Techron
SKU: sku-1769
AE Techron DSR 100 Series Dropout, Surge, Ripple Simulator and AC/DC Voltage Source
$0.00 -
3ctest
SKU: sku-867
3ctest APS 40C10 DC Transient Pulse Simulator for Automotive ISO 7637-2 Pulse 2B/4
Weight: 35 LbsDimensions: 19" 4U ChassisOutput: Single polarity output: 0~40VRise time: 10us(resistive load)Source Impedance: 10mΩ$0.00 - $2,000.00 -
$0.00
-
$0.00Faster Than Most!