Solar EMC Generators

The EMC Shop stocks EMI tents and all test equipment used for conducted susceptibility Testing. Rent or buy Solar EMC Generators and ship immediately.

Solar EMC Generators There are 7 products.

Showing 1 - 7 of 7 items
    • Modular design 
    • Single rack portability 
    • Programmable single stroke, multiple stroke, multiple burst waveforms 
    • Pin injection, cable bundle injection, ground injection up to Level 3 
    • Self-contained microprocessor control 
    • LCD system display
    • lightning induced transient susceptibility testing
    • requirements of RTCA/DO-160E/F/G Section 22 are met at Levels 1 through 3
    Request Quote/More Info
    • Provides output levels from 10 V to more than 400 V into 5 Ω
    • Adjustable pulse position on AC lines relates the transient susceptibility to real
    • time aspects of digital systems
    • Single pulse feature for controlled isolation of transient effects
    • Output terminals for series and parallel injection
    • Standard rack panel construction: 19" wide x 7" high x 12.75" deep
    Request Quote/More Info
    • Rent Solar 8282-1
    • Waveshapes per MIL-STD-461B/C, NEMA TS 2-2003, Version 02.06 sections 2.1.6.1 and 2.1.7
    • Provides outputs up to 600 volts peak amplitude for the 0.15, 5.0 and 10.0 S spikes into a five ohm resistive load (low source impedance).
    • The single pulse feature enables controlled isolation of transient effects.
    • Transients can be injected in synchronism with repetitive circuit functions as required by Method CS06 of MIL-STD-462.
    Request Quote/More Info
    • In accordance with MIL-STD-461E/F, Method CS116
    • Capable of limited testing for RTCA DO-160D, Section 22
    • Panel-mounted digital voltmeter monitors the adjusted open circuit discharge voltage
    • Pulse rates up to one pulse per second maximum (factory adjusted)
    • Single pulse feature enables controlled isolation of transient effects

    Request Quote/More Info
    • Provides output levels from 10 V to 600 V into 5 Ω. Delivers more than 300 kW peak into 0.5 Ω load
    • Adjustable pulse position on AC lines relates the transient susceptibility to real time aspects of digital systems
    • Single pulse feature for controlled isolation of transient effects
    • Output terminals for series or parallel injection
    • Includes 2201-1 and 2201-2 transformers
    • Standard rack panel construction: 19" wide x 7" high x 12.75" deep (48.26 cm x 17.78 cm x 32.38 cm)
    Request Quote/More Info
    • Suitable for MIL-STD-462 CS06 Testing
    • Waveshapes according to MIL-STD-461B/C, NEMA TS 2-2003, Version 02.06 sections 2.1.6.1 and 2.1.7
    • Rentals ship immediately (Contact us to schedule)
    • Includes isolation transformer for parallel and series injection

    To Purchase Solar 8282-1

    $995.00
    Request Quote/More Info
    • Panel-mounted digital meters monitor the adjustable charged line voltage and pulse repetition rate.
    • Adjustable pulse rate from 0.6 p.p.s. to 150 p.p.s., and manual triggering via front panel push button.
    • Charged line output voltage adjustable from 1.0 V to >2000 V
    • Pulse generator with spectral output calibrated in terms of dB V/MHz into a 50 ohms load
    Request Quote/More Info
Showing 1 - 7 of 7 items