Conducted Emissions

Conducted Emissions Test Equipment, Systems & Solutions

• 

  Tektronix DPO4054 Digital Oscilloscope, 4 Channels, 500 MHz

  SKU: 30047

  Bandwidth: 500 MHz

  Channels: 4

  Maximum Waveform Capture Rate: 3,700 wfms/s

  Sample Rates: Up to 5 GS/s on All Channels

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Com-Power LIT-930A 9kHz to 30MHz Transient Limiter

  SKU: 8409

  Connector: N type (input and output)

  Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)

  Frequency Range: 9 kHz - 30 MHz

  Input: 4 Watts CW (+36 dBm) ±50 Vdc

  Insertion Loss: 10 dB +1.5 / -0.5 dB*

  VSWR: 1.1:1

  Cost New:

  Was:

  Price Now:

  $650.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Com-Power LIT-153A 150kHz to 30MHz Transient Limiter

  SKU: sku-446

  Connector: N type (input and output)

  Dimensions: L 3.0” (75 mm) W 1.25” (32 mm) H 1.25” (32 mm)

  Frequency Range: 150 kHz - 30 MHz

  Input: 2 Watts CW (+33 dBm) ±10 Vdc

  Insertion Loss: 10 dB +1.5 / -0.5 dB*

  VSWR: 1.1:1

  Cost New:

  Was:

  Price Now:

  $430.00

  ORDERING OPTIONS

• 

  Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

  SKU: sku-302

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 50 Amps

  Frequency Range: 10 kHz to 50 MHz

  Inductors: 50 µH (0.10 µF Coupling Capacitor)

  Mains & EUT Connections: Terminal Screw

  RF Connector: 50Ω N-type (female)

  Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)

  Voltage Rating: 500 VAC (Line to Ground), 800 VDC

  VIEW PRODUCT Cart

• 

  Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

  SKU: 1551

  Test: CISPR 14

  Application/Test Type: Conducted Emissions, Radiated Emissions

  Clamp factor (CF): -3 dB to +4 dB

  Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 32 mm (1.26 inches)

  Min. site attenuation: 14 dB to 21 dB

  RF Connector: BNC (f), 50 Ohms

  Inquire for Availability

  VIEW PRODUCT

• 

  PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

  SKU: 10264

  Weight: 50 kg (110 pounds)

  Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

  Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)

  Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 4P5W connector

  RF Connector: BNC (f)

  Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

  Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)

  VIEW PRODUCT Cart

• 

  Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

  SKU: 10259

  Frequency Range: 20 Hz - 26.5 GHz

  Resolution: 2 Hz

  Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

  Dynamic Range: > 70 dB

  Amplitude Accuracy: < ± 2.7 dB

  EMC Standards: CISPR 11, CISPR 22, ANSI C63.2

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Keysight (Agilent/HP) 11947A 9 kHz - 200 MHz Transient Limiter w/ High Pass Filter

  SKU: 4602

  Applications: Conducted Emissions, Precompliance EMC Testing

  Frequency Range: 9 kHz to 200 MHz

  Insertion Loss: 10 dB

  Max. Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V

  Typically in Stock

  VIEW PRODUCT

• 

  AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

  SKU: 10249

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 4 GHz

  Gain: 26 dB typical (22 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  VSWR: 2.0:1 Input; 1.7:1 Output

  Cost New:

  Was:

  Price Now:

  $550.00

  Typically In Stock

• 

  AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-213

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 37 dB typical (33 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA

  Maximum Continuous Power: +8 dBm @ 1 dB compression

  VSWR: less than 2.9:1 typical

  VIEW PRODUCT Cart

• 

  AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-212

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 20 dB typical (15 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: less than 1.7:1 typical

  VIEW PRODUCT Cart

• 

  AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

  SKU: sku-211

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

  Connector: SMA(f) to SMA(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 26.5 GHz

  Gain: 32 dB typical

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: 1.7:1 typical

  EMC Standards: CISPR 11, CISPR 32, FCC Part 15

  VIEW PRODUCT Cart