Test Equipment
-
PMM (Narda) 6000N Power Amplifier 9 kHz - 230 MHz, up to 15 W
SKU: sku-490
Weight: 4,5 kgAmplifiers: Power AmplifiersDimensions: 257 x 115 x 316 mmFrequency range: 9 kHz to 230 MHzGeneral Data: Technical Details -
PMM 1008 Magnetic Field Generator with Loop Antenna, 1200 A, 50/60 Hz, IEC/EN 61000-4-8
SKU: sku-489
Weight: 57,3 kgDimensions: 550 x 2000 x 650 mmOperating Temperature: -10 °C to +40 °CSupply Voltage: 230 Vac ± 10 % - 50/60 Hz, 16 A max -
Rent AH Systems EMC Antenna Kit, 20 Hz to 2 GHz
SKU: 10487
Weight: 35 lb.'sDimensions: 28" x 23" x 10" (case)Frequency Range: 20 Hz to 2 GHzStandards Met: FCC, MIL-STD, VDE and TEMPEST Testing -
Rohde & Schwarz SMA100A-B106L 9 kHz to 6 GHz Signal Generator w/ Opt B81
SKU: 7213
Frequency Range: 9 kHz to 6 GHzConnector: BNC FemaleSource Impedance: 50 Ω (nom.)Input Level Range: –6 dBm, ≤ 19 dBmInput Voltage: –10 V to +10 VInquire for Availability -
ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests
SKU: 10462
Test Standards: ISO 11452-5Frequency Range: DC - 1 GHzApplications: Automotive EMC Testing, Electric Vehicle and Battery EMC TestingInquire for Availability -
PMM (Narda) RF-300 Large Loop Antenna System (LLAS) for EN 55015 (CISPR - 15)
SKU: sku-458
Antenna Factor (1 Meter): According to CISPR 16-1-4 Annex CAntennas: Loop AntennasConnector: BNCConstruction: Wood & plastic tubes, collapsibleDimensions: Height: 2,6 mX- Y Width: 2,1 m Distance to ground: min. 0,5 m -
PMM (Narda) AS-05 Broadband Antenna Set, 30 MHz - 18 GHz
SKU: sku-457
Weight: 1.8/1.1/.25 kg.Antenna Factor (1 Meter): 8 to 14 dB/m typical/12 to 40 dB/m typical/36 to 41 dB/m typicalAntennas: (BC-01, LP-04, DR-01)Application/Test Type: Radiated EMCConnector: N-Type(female) -
Com-Power LIT-930A 9kHz to 30MHz Transient Limiter
SKU: 8409
Connector: N type (input and output)Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)Frequency Range: 9 kHz - 30 MHzInput: 4 Watts CW (+36 dBm) ±50 VdcInsertion Loss: 10 dB +1.5 / -0.5 dB*$650.00Typically In Stock -
Com-Power LIT-153A 150kHz to 30MHz Transient Limiter
SKU: sku-446
Connector: N type (input and output)Dimensions: L 3.0” (75 mm) W 1.25” (32 mm) H 1.25” (32 mm)Frequency Range: 150 kHz - 30 MHzInput: 2 Watts CW (+33 dBm) ±10 VdcInsertion Loss: 10 dB +1.5 / -0.5 dB*$430.00 -
Amplifier Research FI7000 Probe Interface
SKU: sku-438
Weight: without enclosure 2.5 kg (6.25 lb) with enclosure 7.25 kg (16 lb)Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Communication: IEEE-488 (GPIB) USB 2.0, Test and Measurement class RS-232 (19200 Baud) Fiber Optic Serial (19200 Baud) reserved for connection to FM7004A Field Monitor Laser Fiber Optic Serial reserved for connection to one FL/PL 7000 series probeDimensions: without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x 1.75 x 10.0 in) with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0 x 12.0 in)RF Connector: (2) E2000 compact duplex female for probe communication and safety fiber loop (2) FSMA for fiber connection to FM7004A -
Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz
SKU: sku-436
Flatness: ±6 dB maximum at rated powerFrequency Range: 4-8 GHz instantaneouslyGain: Max Range: 53 dB; Continous Range: 35 dBImpedance: 50 ohms, VSWR 2.0:1 maximumOutput: Nominal: 262 watts Minimum: 200 watts Linear @ 1 dB Compression: 100 watts minimum -
Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz
SKU: sku-432
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: Reference Signal Source for LISN verificationBattery: 6V NiMH, 1 AhDimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm