IEC/EN Standards Categories
IEC/EN Standards
-
Chroma 61505 Power Source for Precompliance EMC Testing
SKU: 9955
Ouput Power (Single Phase): 4000VACVoltage: 150V/300V/AutoMax Current: 32A/20A (150V/300V)Programmable Output Impedance Range: 0Ω +200µH ~ 1Ω +1mH RangeDC Output Capability: 16A/8A (212V/424V) 2,000 Watts$1,950.00In Stock -
Magnetic Field Immunity Test System per IEC 61000-4-39
SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock -
$495.00In Stock
-
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
3ctest EDS 10IC HBM/MM Electrostatic Discharge Simulator
SKU: 6980
Output Voltage: HBM 5~8000V 5%+5V; MM 5~1000V 5%+5VPolarity: Positive, Negative, AlternateTime Interval: 0.1 - 10s adjustableTrigger Mode: Automatic, single or external triggerPower Supply: AC100 ~ 240V +/-10% 50/60HzIN STOCK -
Typically In Stock
-
CDN 418CAN Data & Control Line Coupling Decoupling Network
SKU: 55116
Coupled Waveform: Damping oscillation wave at 100 kHz/1 MHzPulse Voltage: ≥3 kVCoupling Mode: CAN H+CAN L simultaneous ground/LIN groundCommunication Frequency: <5 MHzData Rate: CAN 10MBit/s, LIN 100 KBit/sInquire for Availability -
ETS-Lindgren 3142E Biconilog Antenna, 30 MHz - 6 GHz
SKU: 10814
Standards: IEC 61000-4-3, FMC 1278, GMW3097Gain: -23 to 8 dBiApplication/Test Type: RF EMC immunity testingFrequency Range: 30 MHz - 6 GHzMaximum Continuous Power: 500 WattsTypically In Stock -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 OhmsTypically In Stock -
Rent ETS-Lindgren 5402 GTEM Test Cell for Small DUT
SKU: 10839
Features: Ships fully assembled, easy unpack and setupApplications: Radiated Emissions, RF/Radiated Susceptibility TestingMax DUT Size: 8" x 8" x 6"Test Standards: FCC Part 15, IEC 61000-4-3$17,500.00In Stock -
3ctest RWS 600 Ring Wave Generator for IEC 61000-4-12
SKU: 10595
Display Interface: 5.7 inch TFT touch screenPhase synchronization: 0°-360°, 1° step or randomPolarity: Positive. negative, alternatingPulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30ΩPulse voltage (open circuit): 0.25 kV–6.0kV ± 10%4-6 Weeks
Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.