Description
Keytek (Thermo Fisher) EMCPro Description:
The Thermo Scientific (Keytek) EMCPro EMC Test System feautres resident capabilities for EMC CE Mark and compliance testing to IEC 61000-4-4 (EFT/Burst), IEC 61000-4-5 (Surge) and IEC 610000-4-11 (PQF) standards. The EMCPro is a reliable, seasoned system that has been a flagship for Thermo Scientific (Keytek) for many years.
The Keytek (Thermo Fisher) EMCPro EMC Test System is the only tester capable of monitoring surge voltage and current at the output terminals as opposed to measuring at the generator, which can lead to large errors.
Videos
Custom Field
Coupling 1 phase, 50 - 277 VAC, 16 Amps maximum; 100 Volts, 10 Amps DC
Dips, Interrupts & Variations 40%, 70%, 80%; Interrupts - 0% (short and open)
Weight 39 kg (85 lb)
Application/Test Type CE Marking - Safety and EMC Directives
Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Burst frequency 1-100 kHz, in 0.5k Hz steps, ±10%
Burst time 15 ms ±20%, for pulse frequencies up to 5 kHz, 0.75 ms above 5 kHz
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Coupling-2 1 phase, 50 - 277 VAC, 16 Amps maximum; 100 Volts, 10 Amps DC
Dimensions 22.9 cm (8.7 in) x 43.4 cm (17.1 in) x 64.8 cm (25.5 in)
Dips, Interrupts & Variations-2 Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Mains & EUT Connections Nema, British, Schuko
Peak inrush current capability Minimum 250 Amps @ 100 - 120 V, Minimum 500 Amps @ 220 - 240 V
Pulse amplitude 5/50 ns ±30%
Pulse current (short circuit) 125 A - 3.0kA ±10%
Pulse repetition Up to 4 per minute
Pulse voltage (open circuit) 250V - 6.0 kV, 12 mode; 250V - 6.0 kV, 2 mode
Standards Met IEC 61000-4-5, EN 61000-4-5, and IEC 61000-4-11
Switching times 1 μs - 5 μs
Test duration 300 ms ±10%
Uvar with step transformer 50 - 277 VAC, 50/60 Hz