> Compliance Standards>ANSI/IEEE Standards>ANSI (IEEE) C62.41
ANSI (IEEE) C62.41

The EMC Shop specializes in conducted immunity testing and failure analysis. Rent, buy or lease ANSI (IEEE) C62.41 Surge Immunity Testing Equipment.

ANSI (IEEE) C62.41 Surge Immunity Testing Equipment

ANSI (IEEE) C62.41 Surge Generators - 100 kHz Ring Wave, Combination Wave, Burst EFT, Long Wave

ANSI (IEEE) C62.41 There are 17 products.

per page
Showing 1 - 12 of 17 items
  • Quick view
    • Floating high voltage output
    • Combination wave 1.2/50us - 8/20us
    • 7.4kV impulse voltage
    • 3.7kA impulse current
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    • Meets standards:
      • UL 1449
      • IEC 61000-4-5
      • ANSI C63.4
      • And more!
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the 3ctest 6kV Surge Simulator
    • Most Economical Surge Solution on the Market
    • Surge Simulation Pulse per IEC/EN 61000-4-5 & UL 1449
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    • Coupling/Decoupling Networks for Single and Three Phase DUT
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,475.00
    • Floating high voltage output
    • Ring wave 0.5us - 100kHz (voltage & current)
    • 7.8kV impulse voltage 12Ω, 30Ω and 200Ω source impedance
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    $1,475.00
    Add to cart
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Suitable for 3 Phase Combination wave & Ring wave Surge Test
    • EUT Current: 3 x 63 Amp continuous
    • EUT Voltage: 480V line to line, 280V line to neutral/ground
    • EUT Frequency: DC – 65 Hz with no loss, 400 Hz max. with power loss
    • Automatic CDN for use with Teseq NSG 3040 & Teseq NSG 3060
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Suitable for 1 Phase Combination wave & Ring wave Surge Test up to 6.6 kV and EFT/Burst Test up to 4.8 kV
    • EUT Current: 16 Amp continuous (25 Amps for 30 minutes)
    • EUT Voltage: 270 VAC rms, 270 VDC
    • Automatic CDN for use with Teseq NSG 3040 & Teseq NSG 3060
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    $975.00
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    $975.00
    Add to cart
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 3 Phase Coupler suitable for DUT up to:
      • 32 Amps, 3x 690 Volts AC
      • 32 Amps, 270 Volts DC
    • Voltage up to 4.8 kV
    • Meets Conducted Immunity Standards:
      • ANSI/IEEE C62.41
      • IEC/EN 61000-4-4
      • IEC 60601-1-2
      • IEC 61326
      • IEC 61850-3
    • Pulse verification acc. to Edition 3 on each coupling path
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keytek ECAT System
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,275.00
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E503 Ring Wave Simulator to 6.6kV (ANSI/IEEE C62.41 Cat. A and B and UL 864)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Optional Modules Available (Call to Configure):
        • E411 EFT Simulator to 4.4 kV
        • E421 EFT Simulator to 8 kV
        • E501B Surge Simulator to 6.6 kV
    $1,275.00
    Add to cart
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Need to test now? Rent the Haefely PIM 110 Ring Wave Generator
    • Floating high voltage output
    • Ring wave 0.5us - 100kHz (voltage & current)
    • 7.8kV impulse voltage 12Ω, 30Ω and 200Ω source impedance
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E503 Ring Wave Simulator to 6.6kV (ANSI/IEEE C62.41 Cat. A and B and UL 864)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Optional Modules Available (Call to Configure):
        • E411 EFT Simulator to 4.4 kV
        • E421 EFT Simulator to 8 kV
        • E501B Surge Simulator to 6.6 kV
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5.7 inch color touch screen front panel operation
    • ultra-compact simulator up to 6.0KV 
    • internal three-phase CDN, current up to16A
    • LAN Ethernet port for remote control
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 17 items