RF Conducted Immunity

Quick Links

Information

RF Conducted Immunity

 

The EMC Shop stocks RF conducted immunity test equipment and builds custom systems to fit the customer DUT and test requirements. Rent or buy a custom system taylored to your DUT and testing parameters. Software is included and custom test sequences will be generated, pre-programmed and calibrated by The EMC Shop staff prior to shipment.

 

Get Application Support, Pricing, Lead Time and More: CONTACT FORM


RF Conducted Immunity Test System


RF conducted testing is an efficient manner to test immunity along power and data lines up to 1 GHz. Common bandwidths range from 10kHz to 400 MHz, where the ~80 MHz range and higher acts as a good alternative to radiated immunity testing requiring high power RF amplifiers.

 

Video RF Conducted Immunity Test System Calibration

RF Conducted Immunity There are 24 products.

Subcategories

  • Bulk Current Injection (BCI) Probes

     

    Bulk Current Injection Testing         EMC/EMI Testing Services         Rent EMC Test Equipment          Antenna Testing

     

    Injecting low level RF signals and high frequency current into wires and cable bundles are a common requirement in ISO 11452-4, Mil-STD-461, RTCA/DO-160 and EN/IEC 61000-4-6. Bulk current injection probes are available in two styles, a window style for passing wires and cables through and a clamping style BCI probe for hard to access cable bundles or more intricate systems.

    Get Application Support, Pricing, Lead Time and More: Contact Form

    Bulk Current Injection (BCI) Probes Test Setup

    Bulk Current Injection (BCI) Probes Test Setup

  • EM Coupling Clamps

    The integrity of both communication and electrical lines within products of all shapes and sizes is important to address early in design stages. EM coupling clamps are used to monitor electrical and magnetic characteristics radiated from electrical/communication wires. Additional, you can generate electrical and magnetic fields using a clamp to inject distrubances onto the lines and evaluate their response. EM clamps are used to meet CISPR, IEC and other compliance standards to evaluate radio frequency disturbances on and around power or data lines.

    Get Application Support, Pricing, Lead Time and More: Contact Form

    EM Clamp Test Setup per IEC 61000-4-6

    EM Coupling Injection Clamp Test Setup per IEC 61000-4-6

    EM Injection Clamp Video Overview

per page
Showing 1 - 12 of 24 items
    • Primary: Less than 5 Ω
    • Secondary: One-fourth 1/4 the primary impedance
    • Frequency response: 30 Hz to 250 kHz
    • Audio power: 200 W
    • Dielectric test: 600 V DC primary to secondaries and each winding to end bells
    • Secondary saturation: 100 A AC or DC maximum
    • Turns ratio: Two-to-one step down
    • Secondary inductance: Approximately 0.6 mH (unloaded)
    • Weight: 34 pounds
    • Size: 4.50" wide x 5.25" high x 8.50" deep plus terminals
    In Stock
    Request Quote/More Info
  • Quick view
    $19,500.00 Monthly
    Sale!
    • In stock, calibrated and ready to ship
    • Turnkey CDN, BCI and EM Clamp solutions for IEC 61000-4-6
    • 35 Watt, 150kHz to 230 MHz Integrated class A power amplifier (See Teseq NSG4070-45 for expanded capabilities)
      Multiple EUT monitoring options
    • 5.7“ TFT color display
    • Internal, menu-based control software
    • Basic remote control software and report generator included
    • Whisper mode
    $19,500.00
    In Stock
    Request Quote/More Info
    • Integrated signal generator 4 kHz to 1 GHz
    • 3 power meter inputs 4 kHz to 1 GHz
    • Integrated class A power amplifier module:
      Multiple EUT monitoring options
      • 45 W, 9 kHz to 1 GHz
    • 5,7“ TFT color display
    • Internal, menu-based control software
    • Basic remote control software and report generator included
    • Optically decoupled remote control
    • Whisper mode
    In Stock
    Request Quote/More Info
    • Bulk Current Injection Test Setup - 10 Vrms IEC
    • Complete, easy to setup test kit for EN/IEC61000-4-6 BCI Testing
    • Pre-programmed test sequences and calibration files
    • Ships immediately
    In Stock
    Request Quote/More Info
    • Bulk Current Injection Test Setup - 400mA Automotive
    • Complete, easy to setup test kit for ISO 11452-4 BCI Testing
    • Pre-programmed test sequences and calibration files
    • Ships immediately
    In Stock
    Request Quote/More Info
    • Achieves:
      • 400mA in Substituion Method
      • 200mA in Closed Loop Method
      • 30 V (40V) with 80 % AM (without 6db)
    • Meets:
      • IEC/EN 61000-4-6
      • IEC 60601-1-2
      • ISO 11452-4
      • Most automotive RF conducted immunity tests
    In Stock
    Request Quote/More Info
    • Meets:
      • ISO 11452-4
      • FMC1278
      • GMW3097
      • Many more...
    • Easy Setup and Teting
    • Lightweight and Portable
    • Achieves:
      • 400mA in Substituion Method
      • 200mA in Closed Loop Method
    In Stock
    Request Quote/More Info
    • Used for IEC/EN 61000-4-16 with LFCI4-16/19
    • DC (positive & negative), 16 2 /3 Hz, 50 Hz or 60 Hz
    • Immunity generator for short-term voltages at the frequency of the electricity supply (mains) up to 300 V
    • Output power 1800 Watts
    • Frequency Accuracy: 50 ppm
    • Output Voltage Accuracy: 5%
    • Over-heating Protection
    • Application software via USB port
    In Stock
    Request Quote/More Info
    • Conductive immunity test system with optional CDN, EM Clamp and or Current Injection Clamp
    • Meet IEC 61000-4-6 or MIL-STD-461 CS114
    • Easy to setup and use of software
    In Stock
    Request Quote/More Info
    • For EMC test according to the standards IEC/EN 61000-4-16 and IEC/EN 61000-4-19
    • Output module with 5A / 250 W
    • DC, sine, triangle and square waveforms external
    • Input adds to internal signal source Windows
    • Application software via USB port
    In Stock
    Request Quote/More Info
    • 100 kHz - 250 MHz Frequency Range
    • Turnkey software for IEC 61000-4-6
    • 25 Watt Integrated Amplifier
    • Computer Based System (USB controlled)
    • Self Calibration with CDN, EM Clamp or Injection Probe
    • RF generator, amplifier and RF Voltmeter usable as independent instruments
    • Connections: EUT "Fail", EUT monitoring by external multimeter
    Typically In Stock
    Request Quote/More Info
    • Conductive immunity test system with optional CDN, EM Clamp and or Current Injection Clamp
    • Easily sweep from 150 kHz to 230 MHz up to 10 Vrms
    • Meet IEC 61000-4-6 with easy plug and play system
    • Easy to setup and use with dedicated laptop/software
    Typically In Stock
    Request Quote/More Info
Showing 1 - 12 of 24 items