RTCA/DO-160 Section 20

RTCA D)-160 Section 20 contains methods for RF conducted suscpeptibility (CS) teting and Radio Frequency Susceptibility (RS) testing. The EMC Shop stocks turnkey solutions with software that allows users to automate test procedures, generates reports and identify susceptibilities in their EUT.

The EMC Shop stocks calibrated equipment and ships i...

RTCA D)-160 Section 20 contains methods for RF conducted suscpeptibility (CS) teting and Radio Frequency Susceptibility (RS) testing. The EMC Shop stocks turnkey solutions with software that allows users to automate test procedures, generates reports and identify susceptibilities in their EUT.

The EMC Shop stocks calibrated equipment and ships immediately. Rent, buy, or lease RTCA DO-160 Section 20 test equipment for radiated and conducted RF susceptibility testing.

RTCA/DO-160 Section 20 Test Equipment

RF Power Amplifiers

EMC Signal Generators with Pulse Modulation

Directional Couplers

High Power, Low Loss RF Cables

Anechoic Chambers

EMC Antennas

E-Field Probes

RF Power Meters and Sensors

More

RTCA/DO-160 Section 20 There are 18 products.

per page
Showing 1 - 12 of 18 items
    • 10 kHz–400 MHz Frequency Range
    • Bulk Current Injection (BCI) RF Conducted Immunity System
    • 100 Watts nominal

    Complete testing solutions to the following standards:

    Request Quote/More Info
    • Modular shielded room (or occasionally a welded room)
    • Lined inside with RF and/or microwave absorbing ("Anechoic") material
    • Anechoic material may be placed on the walls and ceiling
    • It can be placed on all six sides of the room (As known as "Fully Anechoic")
    Request Quote/More Info
    • 1 V/m to 1,000 V/m
    • +/- 1.8 dB Flatness
    • Laser powered
    • Small size permits use in TEM cells and is less disruptive to the RF field
    • User friendly interfaces with the FM7004 field monitor and/or VM7000 virtual monitor software
    • USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
    • Automatic Temperature compensation
    Request Quote/More Info
    • Two Channel Power Meter
    • 10kHz-40GHz Frequency Range Power Head Dependent
    • -70dBm to +44dBm Power Measurement Range
    • Menu-driven 20 character x 4 line LCD display
    Request Quote/More Info
    • Output: 200 Watts CW
    • Frequency Range: 7.5GHz–18GHz
    • Connectors:
      • RF In: f(N)-type
      • RF Out: f(N)-type
    Request Quote/More Info
    • 6.5 to 18.0 GHz Frequency
    • Dual Directional Coupler
    • With Coupling 40 dB
    • Coupling Variation ± 1 dB
    • 1000 W Average Power 
    • 1000 W Power
    Request Quote/More Info
    • Calibrated, Ships Same Day
    • 520- Frequency Range: 9 KHz to 20 GHz
    • 1E1- Step attenuator, 115 dB
    • 1EA- High output power
    • UNW - AM FM Phase modulation/Narrow pulse modulation
    • Ideal for MIL-STD-461 RS103 Testing
    Request Quote/More Info
    • DC - 18 GHz, 400 Watts minimun
    • Suitable for High Power Radiated Immunity, RS103, DO-160, FMC1278 and more.
    • Shielding Effectiveness -120 dB minimum (cable only)
    • Time Delay: 1.21 ns/ft (32.97 ns/m)
    • Dielectric Withstand Voltage: 15 kV at 60 Hz
    • Capacitance: 24.4 pF/ft (80.1 pF/m)
    • N-type Standard Connectors (7-16 DIN, SMA and TNC available upon request)
    Request Quote/More Info
    • 2.5GHz–7.5GHz
    • 1000 Watts 
    • Pulse Amplifier 
    • M1–M8
    • Broadband
    • Forced air cooled
    • Digital display
    • Pulse Modulation
    • IEEE-488 (GPIB) interface
    • VSWR protection
    • Gain control
    • RF output Sample ports
    • Auto sleep
    Request Quote/More Info
    • 100 kHz–6 GHz Frequency Range
    • Comprehensive modulation capability
    • Convenience of control from the front panel
    • Remote communications using either GPIB or RS-232
    • Provides electronic trip protection which protects the generator output against reverse power up to 50 watts
    Request Quote/More Info
    • 300 kHz to 18 GHz
    • Up to 60 dB dynamic, single range
    • 0.17 to 170 V/m (350 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Request Quote/More Info
    • High Power Amplifier Class AB linear GaN design
    • Suitable for all single channel modulation standards
    • Built-in protection circuits
    • Instantaneous ultra wide bandwidth
    • Ethernet RJ-45 TCP/IP, RS422/485, GPIB (Remote Bluetooth App)
    • Touch Screen - Digital Monitor & Control FWD, REV, VSWR, GAIN, ALC, V & I, TEMP
    Request Quote/More Info
Showing 1 - 12 of 18 items