Combination Wave/Surge Generators

Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction ...

Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

Get Application Support, Pricing, Lead Time and More: Contact Form



Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



Common Combination Wave/Surge Tests

  • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
  • A common combination wave test is the 1.2/50 & 8/20
  • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
  • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

 

More

Combination Wave/Surge Generators There are 46 products.

Subcategories

  • 4 kV Surge Generators

    Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Combination Wave/Surge Tests

    • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
    • A common combination wave test is the 1.2/50 & 8/20
    • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
    • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

     

  • 6 kV Surge Generators

    Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Combination Wave/Surge Tests

    • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
    • A common combination wave test is the 1.2/50 & 8/20
    • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
    • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

     

  • 10 kV Surge Generators

    Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Combination Wave/Surge Tests

    • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
    • A common combination wave test is the 1.2/50 & 8/20
    • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
    • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

     

  • 15 kV Surge Generators

    Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Combination Wave/Surge Tests

    • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
    • A common combination wave test is the 1.2/50 & 8/20
    • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
    • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

     

  • 30 kV Lightning Surge Simulators

    Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Combination Wave/Surge Tests

    • IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
    • A common combination wave test is the 1.2/50 & 8/20
    • Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
    • The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)

     

per page
Showing 1 - 12 of 46 items
    • Rentals Ship Immediately
    • All-in-One Package Includes:
    $1,975.00
    Request Quote/More Info
    • Rent the 3ctest 6kV Surge Simulator
    • Most Economical Surge Solution on the Market
    • Surge Simulation Pulse per IEC/EN 61000-4-5 & UL 1449
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    • Coupling/Decoupling Networks for Single and Three Phase DUT
    Request Quote/More Info
    • Fully IEC 61000-4-5 compliant
    • 1.2/50us - 8/20us; IEC coupling
    • Surge pulses 500 Volts to 10,000 Volts
    • Single phase CNV 501S4 1PH/16A coupler included standard (Inquire for 3 Phase)
    Request Quote/More Info
    • Most Economical Surge Solution on the Market
    • Surge Simulation Pulse per IEC/EN 61000-4-5 & UL 1449 (pre-programmed)
    • Built-in Coupling Network for Single Phase DUT
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    $1,475.00
    Request Quote/More Info
    • Rent EM Test NX5 here.
    • Model: bsp-1-300-16 for Burst, Surge, Power Fail
    • Built-in single phase CDN 300 V, 16 A
    • Smallest compact generator with 7" touch screen
    • Surge Immunity per IEC 61000-4-5
    • EFT/Burst Immunity per IEC 61000-4-4
    • Powerfail Immunity per IEC 61000-4-11
    • Monitoring Outputs (BNC)
    Request Quote/More Info
  • 1 Review(s)
    • Combination wave
      • Voltage: 1,2/50us
      • Current: 8/20us
    • Impulse voltage: 200V - 4.2kV
    • Impulse current: 100A - 2.1kA
    • Maximum impulse repetition rate 12 per minute
    • Positive, negative and user definable alternating polarity
    • Integrated CDN for 16A at 264Vac and 110Vdc
    • Impulse voltage, current and EUT current measurement
    • Test parameter ramp functions
    • Phase angle synchronization
    $895.00
    Request Quote/More Info
    • Rentals Ship Immediately
    • Perform Precompliance To:
      • IEC 61000-4-5 Surge Testing (6kV)
      • EFT testing to IEC 61000-4-4 limit (4kV)
      • PQF Dips and Interrupts to IEC 61000-4-11
    • Monitor surge voltage and current at the output terminals 
    • Creates custom test protocols
    • Built in 1 Phase Coupler, 50-277 VAC, 16 Amps (100 VDC,10A) Maximum
    $2,249.00
    Request Quote/More Info
  • Request Quote/More Info
  • Request Quote/More Info
    • Floating high voltage output
    • Combination wave 1.2/50us - 8/20us
    • 7.4kV impulse voltage
    • 3.7kA impulse current
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    • Meets standards:
      • UL 1449
      • IEC 61000-4-5
      • ANSI C63.4
      • And more!
    Request Quote/More Info
    • 10" Color Touch Screen
    • Intelligent HV Mains Charging Mode
    • Automatic Control System, Failure Analysis and more
    • Built in Single or Three Phase CDN
    • 300V - 10kV (±10%) Output Voltage
    • Configure with 10/700 Telecom Wave if Required
    Request Quote/More Info
  • Request Quote/More Info
Showing 1 - 12 of 46 items