Standards Categories
Standards Test Equipment, Systems & Solutions
-
Teseq NSG 438 30kV ESD Simulator Gun
SKU: 10121
Standards Met: IEC 61000-4-2, ISO 10605Need to test now?: ESD Gun Rentals Ship Same DayVoltage Range: 200 V to 30k V (in 100 V steps)Polarity: Positive / negative / automatic changePre-Programmed IEC Levels: YesResolution: 100 V steps$475.00 - $1,190.00IN STOCK -
ETT Copper EMC Test Table/Bench
SKU: 3379
Standards Met: CISPR 25, MIL-STD-461Applications: EV and Automotive, Conducted EmissionsAdditional Applications: Radiated Emissions, Radiated ImmunityDimensions: 2.5m x 1m x 0.9mPermissible Load: >500 LBsIN STOCK -
$235.00In Stock -
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
SKU: 8467
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, ISO 11452-4Applications: Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 50VrmsBCI Test Levels (w/ built-in amplifier): 10V/400mA/114 dBµAFrequency Range (w/ built-in amplifier): 100 kHz - 400 MHzTest Setup/Application Overview: Conducted Immunity/Susceptibility Test SetupTypically In Stock -
R&S ESW Series EMI Test Receiver
SKU: 11722
Weight: 45.42 lbDimensions: 18.15 in × 9.44 in × 19.81 inFrequency Range: 2 Hz up to 8, 26.5, or 44 GHzStandards Met: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCCTypically In Stock -
Lumiloop LSProbe 2.0 CW and Pulse Field Probe, 9 kHz - 18 GHz
SKU: 51903
Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsField Strength Range: <1 V/m to 1,000 V/m (5 kV/m under 1 GHz)Frequency Range: 9 kHz to 18 GHzResolution: <0.05 V/mTest Standards: MIL-STD 461 RS103, DO-160Typically In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzResources: BCI Test SetupVideos: Calibration Setup BCI TestingIn Stock -
Yokogawa WT5000 Precision Power Analyzer
SKU: 8802
Input Elements: 4Max Current (per channel): 30 AmpsMax Voltage (per channel): 1000 VoltsHarmonics Measurement Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-12In Stock -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
PA40G10M Millimeter-Wave Low Noise Amplifier
SKU: 1888
Max Frequency: 40 GHzMin Frequency: 10 MHzOutput Power: +18 dBm (P1dB)Gain: 40 dB typicalMax RF Input Power: +6 dBm @ 1 dB compressionAC Input Power: 100/220 VAC regulated P/Soutput: 12 VDC 170 mARF Connector: 2.9mm(f)EMC Standards: CISPR 11, CISPR 32, FCC Part 15Applications: EMI Precompliance Testing Emissions Measurements, CE Marking$495.00 - $6,975.00IN STOCK -
SS18G-150 6 GHz - 18 GHz Solid State RF Amplifier for 200 V/m
SKU: 9568
Applications: Military & Aerospace Radiated Susceptibility, Radar/PulseField Strength Levels ( at 1 meter ): 500 V/m CWAmplifier Class: A-LinearFrequency Range: 6 - 18 GHzGain: 56 dB TypicalRated Power: 150 WattsMax RF Input Power: 1 mW (0 dBm)AC Input: 220 V (2.8kVA)Connector type: N(f)Test Standards: RTCA DO-160 Section 20, MIL-STD-461 RS 103, MIL-STD-810ETypically In Stock -
LPA7G 290 MHz - 7 GHz Log Periodic Antenna
SKU: 9006
Antenna Factor (1 Meter): 15 to 47 db/mApplications: EMC Precompliance TestingDimensions: 26.3" x 20.1"Frequency Range: 290 MHz - 7 GHzGain: 5.8 dBiMaximum Input Power (CW): 1000 WattsMounting Base: ¼ - 20 Thread, femaleVSWR: Typ. 1.65:1$395.00 - $4,395.00In Stock