Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards
-
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
Teseq NSG 3040 Transient Immunity Test System
SKU: 4141
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT Voltage (w/ Built in CDN): 264 VoltsMax EUT Current (w/ Built in CDN): 16 Amps$1,495.00In Stock -
GTEM 550V Vertical GTEM
SKU: 30081
Max. EUT Size: 35(L) x 40(W) x 27(H) cm / 13 x 15 x 10 inStandards for Emissions Testing: CISPR 14-1, IEC 61000-6-3, and IEC 61000-6-4Standards Met: IEC 61000-4-20Applications: Radiated Immunity, Radiated EmissionsInquire for Lead Time -
Zimmer LMG95 Single Phase Power Analyzer
SKU: 7058
Standards Met: IEC 61000-3-2, IEC 61000-3-3,Additional Standards Met: IEC 61000-3-11, IEC 61000-3-12Measurement Range: 600V (1600 V peak) and 20A (960 A peak for the measurement of inrush currents)Applications: Conducted EmissionsCompliance Accessories: RI2415 Reference Impedance Network$365.00Typically In Stock -
Inquire for Availability -
Schloder CN 1240-125 125A Coupling Network
SKU: 30174
Frequency Range: DC, 15 Hz - 150 kHzInput Voltage: 0 V up to ± 300 VRated Voltage (AE - EUT): 250 V AC/DCRated current (AE - EUT): 125 AConnector: BNCInquire for Availability -
Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler
SKU: 11294
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 0.1 kHz - 1,000 kHzBurst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuitCoupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler$975.00In Stock -
Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9
SKU: 30172
Max. Contin. Frequency Current Supply: 10 AMax. Short Term Frequency Current Supply: 30 A (3 s)Max. Contin. Frequency Field Strength Supply: 330 A/mMax. Short Term Frequency Field Strength Supply: 11100 A/mApplications: Radiated ImmunityInquire for Availability -
Haefely PIM 100 Combination Wave Impulse Module
SKU: 10297
Output: Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) up to 7.8kVCoupling (Max EUT Power): 3 Phase - 100 Amps, 690 VACTest Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Applications: Surge immunity - Combo Wave, Ring Wave and Oscillatory Waves, EMC Precompliance TestingPulse current (short circuit): 0.1 – 3.7 kA ±10% (8 us ±20% risetime)In Stock -
3cTest SEPN 4532Ta CDN for EFT/Burst, Surge, and Ring Wave Immunity Testing
SKU: 30186
Applications: Power LinesTest Standards: EN/IEC 61000-4-12, IEC 61000-4-4, IEC 61000-4-5Input Voltage: AC 100V to 240 V, 50/60 HzCoupling Voltage: 6 kV max.Coupling Current: 3 kA max.Inquire for Lead Time