EMCO 3825/2 LISN 9kHz - 100 MHz for CISPR / 1PH - The EMC Shop

EMCO 3825/2 LISN 9kHz - 100 MHz for CISPR / 1PH

Condition:
Used

No reviews yet Write a Review
Frequency Range:
9 kHz - 100 MHz
Power Source Frequency:
DC - 60 Hz
Maximum Current:
25 A
Maximum Voltage:
400 VAC Line - Line; 220 VAC Line to Ground
Network Inductance Impedance:
50/250 µH, 50 Ω
Manufacturer:
ETS-Lindgren

 

Availability:

Inquire for Availability

SKU:
30021

 

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop is an ISO 17025 accredited calibration company with the EMCO 3825/2 LISN in stock available for sale or rental. Repair and refurbishment services available as well. Contact us now for application support.

The EMCO 3825-2 LISN is a multi-line low pass filter network used for conducted emissions measurement.LISNs and PLISNs isolate an electrically powered EUT from the external power source, stabilize line impedance, and provide a 50-ohm RF connection to measure EMI voltage generated by the EUT. When line currents drawn by the EUT are too great for a LISN, the EMCO 3825-2 probe can be used for EMI voltage measurements.

Videos

Key Considerations

Manufacturer:
ETS-Lindgren
Frequency Range:
9 kHz - 100 MHz
Power Source Frequency:
DC - 60 Hz
Maximum Current:
25 A
Maximum Voltage:
400 VAC Line - Line; 220 VAC Line to Ground
Network Inductance Impedance:
50/250 µH, 50 Ω

Related EMC Equipment & Solutions

Com-Power LI-3P-263 9kHz – 30MHz Three Phase LISN for CISPR / ANSI

Com-Power LI-3P-263 9kHz – 30MHz Three Phase LISN for CISPR / ANSI

SKU: 11894

Weight: 27.5 lbs.
Application/Test Type: Power Line Conducted Emissions Tests
Current rating: 63 Amperes
Dimensions: 19.3” x 13.9” x 2.3″
Frequency Range: 9 kHz – 30 MHz
Inductors: 50 µH
Insertion loss: less than 0.7 dB
Isolation: more than 40 dB
Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
RF Connector: RF Measurement Port 50Ω – N-Type (female)
Standards Met: ANSI C63.4, CISPR 16-1-2
Typically In Stock
VIEW PRODUCT Cart
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2 - The EMC Shop

PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

SKU: 10058

Weight: 70 kg (154 pounds)
Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)
Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard
RF Connector: BNC (f)
Standards Met: CISPR 16-1-2, VDE 0876, FCC Part 15, MIL-STD 461F
Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)
Inquire for Availability
VIEW PRODUCT Cart
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps - The EMC Shop

EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

SKU: 11287

Application/Test Type: Power line conducted emissions tests
Current Rating: 10 Amps
Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 µH/250µH
Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)
RF Connector: 50Ω BNC Monitor
Standards Met: FCC Part 15, VDE 0871, VDE 0875
Voltage Rating: 250 VAC (Line to Ground)
$195.00 - $1,975.00
In Stock
ORDERING OPTIONS
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4

Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4

SKU: 10878

Weight: 20.5 lbs / 9.3 kg
Application/Test Type: Power line conducted emissions tests
Current Rating: 20 Amperes AC, 14 Amperes DC
Dimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cm
Frequency Range: 9 KHz - 30 MHz
Inductors: 250 & 50 microhenry (air-core)
Insertion Loss: 6 dB to 1 dB
Isolation: 20 dB to 40 dB
Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
RF Connector: 50Ω N-type (female)
Standards Met: CISPR 16-1-2 / ANSI C63.4
Voltage Rating: 270 VAC (Line to Ground), 380 VDC
$295.00 - $3,965.00
Typically In Stock
ORDERING OPTIONS
Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

SKU: sku-603

Weight: 27.5 lbs.
Application/Test Type: Power Line Conducted Emissions Tests
Current Rating: up to 100 Amperes
Dimensions: 19.3” x 13.9” x 2.3"
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 µH or 250 µH
Insertion loss: less than 0.7 dB
Isolation: more than 40 dB
Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
RF Connector: RF Measurement Port 50Ω - N-Type (female)
Standards Met: ANSI C63.4, CISPR 16-1-2
Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
VIEW PRODUCT Cart
Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

SKU: sku-893

Weight: 27.5 lbs.
Application/Test Type: Power Line Conducted Emissions Tests
Current rating: 32 Amperes
Dimensions: 19.3” x 13.9” x 2.3″
Frequency Range: 9 kHz – 30 MHz
Inductors: 50 µH
Insertion loss: less than 0.7 dB
Isolation: more than 40 dB
Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
RF Connector: RF Measurement Port 50Ω – N-Type (female)
Standards Met: ANSI C63.4, CISPR 16-1-2
VIEW PRODUCT Cart