Wavecontrol WPF8 100 kHz - 8 GHz Electric Field Probe

Wavecontrol WPF8 100 kHz - 8 GHz Electric Field Probe

Condition:
Used

No reviews yet Write a Review
Frequency range:
100 kHz - 8 GHz
Sensor type:
Isotropic RMS diode technology
Type of frequency response:
Flat
Sensitivity:
0.2 V/m
Calibration:
ISO 17025 accredited (ILAC)
Calibration period:
24 months (recommended)
Temperature range:
- 20 ºC to 50 ºC
Temperature response:
+ 0.1/ - 1 dB (related to 20 ºC)
Attenuation at 50/60 Hz:
> 80 dB
Manufacturer:
Wavecontrol

 

Wavecontrol WPF8 Downloads

Datasheet

 

Availability:

In Stock

SKU:
6883

 

Getting Started...

Check out our Google Reviews

Wavecontrol WPF8 Overview

The EMC Shop stocks the Wavecontrol WPF8 100 kHz - 8 GHz Electric Field Probe for use with the Wavecontrol SMP2 or SMP3 electromagnetic field meter

Telecommunications (Wireless telecom networks, Broadcast), RFID/EAS, Induction heating (HF), Plastic welding, Semiconductor production, Medical, Workplace assessment, Assessment of workers bearing AIMDs, Human exposure assessment, Research/Labs, Microwave drying.

Videos

Wavecontrol WPF8 Key Considerations

Manufacturer:
Wavecontrol
Frequency range:
100 kHz - 8 GHz
Sensor type:
Isotropic RMS diode technology
Type of frequency response:
Flat
Sensitivity:
0.2 V/m
Calibration:
ISO 17025 accredited (ILAC)
Calibration period:
24 months (recommended)
Temperature range:
- 20 ºC to 50 ºC
Temperature response:
+ 0.1/ - 1 dB (related to 20 ºC)
Attenuation at 50/60 Hz:
> 80 dB

Related EMC Equipment & Solutions

Wavecontrol SMP3 RF Field Meter - 60 GHz Spectrum Analyzer - The EMC Shop

Wavecontrol SMP3 RF Field Meter

SKU: 8899

Frequency Range: DC to 60 GHz
Battery Life: >24 Hours
Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)
Measurement Range: 0.2 - 1000 V/m
High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz
Probe Selection: E & H Field (DC - 60 GHz)
More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.
Typically In Stock
VIEW PRODUCT Cart
Wavecontrol SMP2 Broadband Field Strength Meter - The EMC Shop

Wavecontrol SMP2 Broadband Field Strength Meter

SKU: 7056

Weight: 10.6 oz.
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh
Dimensions: 1.5 x 2.0 x 8 inches
Frequency Range: 100 kHz - 60 GHz
Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)
Recharging Time: 2 hours
Standards Met: IEC 61000-4-3
IN STOCK
VIEW PRODUCT Cart
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter - The EMC Shop

Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

SKU: 12955

Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz
Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground
Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)
Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)
Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016
Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601
Battery Life: 16 Hours (2-4 Hour Recharge)
Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope
$495.00 - $1,850.00
Typically In Stock
ORDERING OPTIONS
PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

SKU: sku-611

Weight: 450 g
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
Battery: 2 ea. AA type, re-chargeable batteries
Dimensions: 96x64x465 mm
Frequency Range: varies on probe
Operation Time: 8 hours (typical)
Probe Holder Tip: BNC
Recharging Time: re-charged via supplied charger
RF Field Probes: E-Field
Standards Met: IEC/EN 61000-4-3
VIEW PRODUCT Cart
Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

SKU: sku-885

Weight: 10.6 oz.
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh
Dimensions: 1.5 x 2.0 x 8 inches
Frequency Range: 100 kHz - 60 GHz
Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)
Recharging Time: 2 hours
Standards Met: IEC 61000-4-3
$595.00 - $2,495.00
Typically In Stock
ORDERING OPTIONS