ANSI (IEEE) C62.41

ANSI (IEEE) C62.41 Voltage Surge Immunity for AC Power Circuits

ANSI (IEEE) C62.41 There are 17 products.

per page
Showing 1 - 12 of 17 items
    • Floating high voltage output
    • Combination wave 1.2/50us - 8/20us
    • 7.4kV impulse voltage
    • 3.7kA impulse current
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    • Meets standards:
      • UL 1449
      • IEC 61000-4-5
      • ANSI C63.4
      • And more!
    $1,799.00
    Request Quote/More Info
    • Rent the 3ctest 6kV Surge Simulator
    • Most Economical Surge Solution on the Market
    • Surge Simulation Pulse per IEC/EN 61000-4-5 & UL 1449
    • Coupling/Decoupling Networks for Single and Thrre Phase DUT
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    $17,725.00
    In Stock
    Request Quote/More Info
    • Floating high voltage output
    • Ring wave 0.5us - 100kHz (voltage & current)
    • 7.8kV impulse voltage 12Ω, 30Ω and 200Ω source impedance
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    $1,275.00
    In Stock
    Request Quote/More Info
    • Suitable for 3 Phase Combination wave & Ring wave Surge Test
    • EUT Current: 3 x 63 Amp continuous
    • EUT Voltage: 480V line to line, 280V line to neutral/ground
    • EUT Frequency: DC – 65 Hz with no loss, 400 Hz max. with power loss
    • Automatic CDN for use with Teseq NSG 3040 & Teseq NSG 3060
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
    • Suitable for 1 Phase Combination wave & Ring wave Surge Test up to 6.6 kV and EFT/Burst Test up to 4.8 kV
    • EUT Current: 16 Amp continuous (25 Amps for 30 minutes)
    • EUT Voltage: 270 VAC rms, 270 VDC
    • Automatic CDN for use with Teseq NSG 3040 & Teseq NSG 3060
    4-6 Weeks
    Request Quote/More Info
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    $975.00
    4-6 Weeks
    Request Quote/More Info
    • 3 Phase Coupler suitable for DUT up to:
      • 32 Amps, 3x 690 Volts AC
      • 32 Amps, 270 Volts DC
    • Voltage up to 4.8 kV
    • Meets Conducted Immunity Standards:
      • ANSI/IEEE C62.41
      • IEC/EN 61000-4-4
      • IEC 60601-1-2
      • IEC 61326
      • IEC 61850-3
    • Pulse verification acc. to Edition 3 on each coupling path
    In Stock
    Request Quote/More Info
    • Suitable for pre-compliance to IEC 61000-4-4
    • Built-in 3 Phase / 30 Amp Coupler
    • Easily Programmable
    • 100 Day Warranty
    • Fresh NIST calibration
    In Stock
    Request Quote/More Info
    • Rent the Keytek ECAT System
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    $9,500.00
    In Stock
    Request Quote/More Info
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E503 Ring Wave Simulator to 6.6kV (ANSI/IEEE C62.41 Cat. A and B and UL 864)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Optional Modules Available (Call to Configure):
        • E411 EFT Simulator to 4.4 kV
        • E421 EFT Simulator to 8 kV
        • E501B Surge Simulator to 6.6 kV
    $1,275.00
    In Stock
    Request Quote/More Info
  • Quick view
    $14,392.00 $17,990.00 -20%
    • Need to test now? Rent the Haefely PIM 110 Ring Wave Generator
    • Floating high voltage output
    • Ring wave 0.5us - 100kHz (voltage & current)
    • 7.8kV impulse voltage 12Ω, 30Ω and 200Ω source impedance
    • Impulse voltage & current monitors
    • Accurate phase angle synchronization
    $14,392.00 $17,990.00 -20%
    Reduced price!
    In Stock
    Request Quote/More Info
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E503 Ring Wave Simulator to 6.6kV (ANSI/IEEE C62.41 Cat. A and B and UL 864)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Optional Modules Available (Call to Configure):
        • E411 EFT Simulator to 4.4 kV
        • E421 EFT Simulator to 8 kV
        • E501B Surge Simulator to 6.6 kV
    $12,750.00
    In Stock
    Request Quote/More Info
Showing 1 - 12 of 17 items