This antenna covers the 1 GHz to 18 GHz range making it ideal as a receive antenna for any radiated emissions testing above 1 GHz. It can be used for FCC Part 15, MIL-STD 461 RE102 and a host of other standards The package is calibrated together for efficiency. The EMC Shop typically has one in stock available for immediate shipment.
AH18G Overview
- ASSOCIATED EQUIPMENT
- SPECIFICATIONS
- ADDITIONAL INFO
| PHYSICAL SPECIFICATIONS | |
|---|---|
| Length | 36.1 cm (14.21 in) |
| Width | 24.2 cm (9.53 in) |
| Height | 24.8 cm (9.76 in) |
| Weight | 2.5 kg (5.51 lb) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Frequency Minimum | 1 GHz |
| Frequency Maximum | 18 GHz |
| VSWR (Average) | N/A (Rx Only) |
| Impedance (Nominal) | 50 |
| Connector (Amplifier Output) | SMA (Female) |
| Pattern Type | Directional |
| Polarization | Linear |
The AH18G active horn antenna allows for precisions noise measurement and identification.
• FREQUENCY RANGE
This antenna covers the 700 MHz Hz to 18 GHz range making it ideal as a receive antenna for any emissions testing above 1 GHz.
• DESIGNED FOR MIL-STD-461
DRHA18G Dual Ridged Horn Antenna, (without pre-amplifier) is identical to the antenna described in MIL-STD-461 RE102, for emissions testing above 1 GHz.
• FITTED AMPLIFIER
The amplifier has a typical gain of 28 dB. The gain flatness across the range is 2.5 dB. The pre-amplifier has a maximum noise figure of 4 dB maximum with the typical noise figure being 3 dB. The power output is +17 dB minimum at the 1 dB point. The input and output characteristics of the pre-amplifier are an input and output VSWR of 2:1 maximum.
