DP7 High Voltage Probe for Surge Generator Waveform Verification per IEC 61000-4-5

DP7 High Voltage Probe for Surge Generator Waveform Verification

Condition:
New

No reviews yet Write a Review
Bandwidth:
DC - 70 MHz
Attenuation:
1:100 and 1:1000
Accuracy:
±2%
Input Voltage Range:
< +700V for X100, < +7000V for X1000
Output Voltage:
≤ + 7000V
Output Impedance:
50 Ω
Standard Met:
IEC 61000-4-5, IEC 61010-031 Category I
Applications:
Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design
Manufacturer:
The EMC Shop

 

DP7 Downloads

Datasheet (PDF File)

$185.00

 

SKU:
6533-RE
Availability:

IN STOCK

Getting Started...

DP7 Overview

The EMC Shop model DP7 meets IEC 61010-031 Category I Requirements and is ideally suited for measuring high-speed voltage surge in power electronics circuits. The DP7 High Voltage Probe can be used for Surge Generator Waveform Verification per IEC 61000-4-5.

Features

  • Safety Certified-Over range Indicator
  • Up to +/-7000 Vp-p Differential
  • Bandwidth up to 70 MHz

Applications

  • High Voltage Floating Measurements
  • Voltage Surge Measurement
  • Power Electronics System Design
  • Electronic Ballast Design

Included

  • Hardcase
  • AC Adapter
  • Conformance Cert
  • HV Alligator Clips Red/Black
  • Input and Out Leads connected to Unit
  • Manual

Videos

DP7 Key Considerations

Manufacturer:
The EMC Shop
Bandwidth:
DC - 70 MHz
Attenuation:
1:100 and 1:1000
Accuracy:
±2%
Input Voltage Range:
< +700V for X100, < +7000V for X1000
Output Voltage:
≤ + 7000V
Output Impedance:
50 Ω
Standard Met:
IEC 61000-4-5, IEC 61010-031 Category I
Applications:
Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design

Related EMC Equipment & Solutions

Pearson 101 Current Monitor for Surge Generator Output Verification

Pearson 101 Current Monitor for Surge Generator Output Verification

SKU: 11067

Weight: 23 ounces
Aperture: See data sheet
Connector type: BNC (UG-290A/U)
Current time product: 2.5 Ampere-second maximum
Dimensions: See data sheet
Droop rate: 0.1 %/millisecond
General Data: Technical Details
High frequency 3dB cut-off: 4 MHz (approximate)
I/f figure: 12 peak Amperes/Hz
Low frequency 3dB cut-off: 0.25 Hz (approximate)
Maximum peak current: 50000 Amperes
Maximum rms current: 200 Amperes
Output resistance: 50 Ohms
Probes: Current monitoring
Sensitivity: 0.01 Volt/Ampere +1/-0%
Useable rise time: 100 nanoseconds
IN STOCK
VIEW PRODUCT
Thermo Keytek ECAT High Voltage Burst/EFT Generator - The EMC Shop

Thermo Keytek ECAT High Voltage Burst/EFT Generator

SKU: 131312

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: Adjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kV
Burst time: 1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolution
Polarity: Positive, negative, alternating
Pulse amplitude: 200V to 8.0kV, ±10%; 5 V resolution
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEEE C62.41, UL 864, ANSI/IEEEC62.41, UL 1449
In Stock
VIEW PRODUCT Cart