Clearance Categories
Clearance Test Equipment, Systems & Solutions
-
Sorensen SGA160/63 Programmable Precision High Power DC Power Supply
SKU: 12249
Max Voltage: 160 VoltsMax Current: 63 AmpsTotal Power: 10 kWInput Power: 220V/1PHIn Stock -
EM Test Voltage Transient Emissions Tester AN 200
SKU: 1226
Voltage Range: 0-30 VDCRated Current: 25 APeak Voltage: 1000 VDimensions: Dimensions: (L x B x H): 425 x 530 x 180 mmInductance: (5 µH/5 mΩ)In stock -
Anritsu Network Analyzer 37247D
SKU: 2660-1
Frequency Range: 40 MHz to 20 GHzFrequency Resolution: 1 Hz$17,500.00In Stock -
Ophir 5155FE Class A Linear Power Amplifier
SKU: 5240
Max Frequency: 2.5 GHzMin Frequency: 800 MHzOutput Power: 250 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: MIL-STD 461 RS103, DO-160 Section 20Gain: 48 dBAC Input Power: 220 VAC, single phaseIn Stock -
-
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: 12103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing$675.00 - $9,750.00 -
ETS-Lindgren HI-2200 Electric and Magnetic RF Survey Meter
SKU: 30194
Meter Internal Memory: >65,000 data pointsUser Selectable Units: V/m, μW/cm2, mW/cm2, W/m2 A/m, mA/mMeter Connector Type: RS-232 I/O serial interface six-pin mini DINTest Standards: IEC 61000-4-3Inquire for Availability -
$7,500.00 -
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
SKU: 12080
Test Standards: EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111and UL6095Electric Tests: Electrical Analyzer AC/DC Hipot, Insulation, Ground BondGround Bond Testing: up to to 30A ACProgrammable Output Voltage: up to 5KV AC and 6KV DC$3,995.00IN STOCK -
Anritsu MT8860C 802.11 WLAN Test Set
SKU: 2986
AC Supply: 85 to 264 VFrequency Range: 47 to 63 HzPower: 100 VAConnectors: BNCVSWR: Nominally < 1.5:1 (2.4 GHz frequency band), Nominally < 1.6:1 (5 GHz frequency band)Test Standards: IEEE Std 802.11b-1999, IEEE Std 802.11g-2003, IEEE Std 802.11-2007$350.00 - $3,500.001 Left -
Teseq NSG 3025 Fast Transient/EFT Generator for IEC/EN 61000-4-4
SKU: 11993
Test Capabilities: Electrical Fast Transient ImmunityStandards Met: IEC/EN 61000-4-4Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage / Current (w/ Built in CDN): 250 Volts, 16 AmpsMax EUT DC Voltage / Current (w/ Built in CDN): 120 Volts, 16 AmpsEFT/Burst Pulse Output Capability: 4.8 kVExternal Coupling: Data LinesWas:$9,500.00$7,500.00In Stock -
CP-CF Calibration Fixture for Current Probes
SKU: 11911
Max Probe Girth: 2.75"Fits Probe Arpetures: 1.25" to 1.75"Frequency Range: 20 Hz - 500 MHzInsertion Loss: < 2dBConnetors: N(f)Applications: Conducted Immunity/Susceptibility Test SetupTest Standards: IEC/EN 61000-4-6, ISO 11452-4In stock