PLA30M9k Passive Shielded Loop Antenna per CISPR 16-1-4

PLA30M9k Passive Shielded Loop Antenna per CISPR 16-1-4

Condition:
New

No reviews yet Write a Review
Weight:
2.5 lb.'s (1.13 kg)
Dimensions:
56.8 cm in Diameter
Frequency Range:
9 KHz to 30 MHz
RF Connector:
BNC, Female
Standards Met:
MIL-STD, CISPR
Manufacturer:
The EMC Shop

 

PLA30M9k Downloads

Datasheet

$1,795.00

 

SKU:
12133-NE
Availability:

Typically In Stock

Getting Started...

PLA30M9k Overview

This PLA30M9k Passive Shielded Loop Antenna per CISPR 16-1-4 is designed with a balanced Faraday shield for magnetic field emissions and immunity type measurements. The loop antennas electrostatic shield minimizes the E-field response for a more accurate magnetic field measurement. With new emerging technologies like wireless power and possible changes for radiated emission test distances, passive loop antennas are an ideal test solution covering 9 KHz to 30 MHz frequency range, and has 1/4-20 thread for simple tripod mounting.

What is the PLA30M9k Used For?

  • Magnetic Field Antenna
  • Used for Test Site Validation
  • CISPR 16-1-4 Section 4.3.2
  • CISPR 16-1-6 Antenna Factors (Calibration Additional)

How Many Antenna Positions?

Three different loop antennas orientations shall be measured

PLA30M9k Key Considerations

Manufacturer:
The EMC Shop
Weight:
2.5 lb.'s (1.13 kg)
Dimensions:
56.8 cm in Diameter
Frequency Range:
9 KHz to 30 MHz
RF Connector:
BNC, Female
Standards Met:
MIL-STD, CISPR

Related EMC Equipment & Solutions

BA1G EMI Bicone Antenna 30 MHz - 1 GHz - CISPR 16-1-4

BA1G EMI Bicone Antenna 30 MHz - 1 GHz - CISPR 16-1-4

SKU: 21143

Weight: 1.6 lb.'s (725 g)
Test Standards: CISPR 11, CISPR 16-1-4, CISPR 16-2-3, FCC 18 and others
Connector: N-type (female)
Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)
Frequency Range: 30 MHz - 1GHz
Gain: -50 to 2.5 dBi
Impedance: 50 Ohms nominal
Maximum Continuous Power: 200 Watt
Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female
Typically In Stock
VIEW PRODUCT Cart
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

SKU: sku-86

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
VIEW PRODUCT