The test generator generates interferences as defined in IEC / EN 61000-4-6
Immunity to conducted disturbances, induced by radio-frequency fields. The standard described a test setup, in which can influence these high-frequency in- terferences without a complicated structure with antennas, field instrumentation and shielded rooms on a EUT. Via coupling networks and coupling clamp’s sine waves are induced directly into power and signal lines. The EUT keeps its usual place in the installation; the complete unit can be tested in its function.
Features:
- Computer-based system (controlled by USB)
- Self-calibration of the test system (Generator and CDN)
- RF-Generator, amplifier and RF-Voltmeter can be used as stand-alone devices
- Connections: EUT “FAIL”, EUT monitoring by external multimeter, E.G. DUT signal
- Calibration of coupling / decoupling devices
- EM clamp is performed automatically
- Extensive additions like attenuators, calibration kids, etc. deliverable
- Directional Coupler
Includes:
- Ground Cable
- 50 Ω terminator
- Dongle
- USB
- USB 2.0 cable
- Certificate of Calibration
- 2x BNC Cables
- 2x N Male to BNC Female Adapter
