Description
The Thermo Keytek EMCPro Plus EMC Test System feautres resident capabilities for EMC CE Mark and compliance testing to IEC 61000-4-4 (EFT/Burst), IEC 61000-4-5 (Surge) and IEC 610000-4-11 (PQF) standards. The EMCPro Plus is a reliable, seasoned system that has been a flagship for Thermo Scientific (Keytek) for many years.
The Thermo Keytek EMCPro Plus EMC Test System has monitoring ports for surge voltage and current at the output terminals as opposed to measuring at the generator, which can lead to large errors.
Included With the Thermo Keytek EMCPro Plus:
- Keytek EMCPro Plus
- EUT Supply Cable
- AC Power Cord (120VAC)
- User Manual
- Calibration Certificate
- 10% off Service for Life
- (Optional) Control Software and Laptop
Custom Field
Coupling 1 phase, 50 - 277 VAC, 16 Amps maximum; 100 Volts, 10 Amps DC
Dips, Interrupts & Variations 40%, 70%, 80%; Interrupts - 0% (short and open)
Weight 39 kg (85 lb)
Application/Test Type CE Marking - Safety and EMC Directives
Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Burst frequency 1-100 kHz, in 0.5k Hz steps, ±10%
Burst time 15 ms ±20%, for pulse frequencies up to 5 kHz, 0.75 ms above 5 kHz
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Coupling-2 1 phase, 50 - 277 VAC, 16 Amps maximum; 100 Volts, 10 Amps DC
Dimensions 22.9 cm (8.7 in) x 43.4 cm (17.1 in) x 64.8 cm (25.5 in)
Dips, Interrupts & Variations-2 Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Mains & EUT Connections Nema, British, Schuko
Peak inrush current capability Minimum 250 Amps @ 100 - 120 V, Minimum 500 Amps @ 220 - 240 V
Pulse amplitude 5/50 ns ±30%
Pulse current (short circuit) 125 A - 3.0kA ±10%
Pulse repetition Up to 4 per minute
Pulse voltage (open circuit) 250V - 6.0 kV, 12 mode; 250V - 6.0 kV, 2 mode
Standards Met IEC 61000-4-5, EN 61000-4-5, and IEC 61000-4-11
Switching times 1 μs - 5 μs
Test duration 300 ms ±10%
Uvar with step transformer 50 - 277 VAC, 50/60 Hz