IEEE 299 Shielding Effectiveness Test Setup

IEEE 299 Shielding Effectiveness Measurement System

Condition:
New

No reviews yet Write a Review
Frequency Range:
9 kHz - 18 GHz
Antenna Polarization:
Automatic or Manual Options
Configurations:
Single or Multiple Antennas
Measurement Types:
E-Field, H-Fied, Plane Wave, Back and Front

 

Availability:

Typically In Stock

SKU:
TES-IEEE299-CUSTOM

 

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop stocks all the test equipment needed to perform shielding effectinveness testing from 9 kHz - 18 GHz. Solutions for multiple test points or a limited scope can be configured to save money.

  • Power and Transmission at .3 m
  • Resonant range setup 20 - 300 MHz
  • Polarization switching - Automatic or Manual

IEEE 299 Test Equipment

  • Small loop antennals
  • Biconical antennas
  • Dipole Antennas
  • Horn Antennas
  • Field Strength Meters
  • Spectrum Analyzers
  • Signal Generator
  • RF amplifiers
  • Attenuators
  • RF Cables
  • Antenna tripods

Videos

Key Considerations

Frequency Range:
9 kHz - 18 GHz
Antenna Polarization:
Automatic or Manual Options
Configurations:
Single or Multiple Antennas
Measurement Types:
E-Field, H-Fied, Plane Wave, Back and Front

Related EMC Equipment & Solutions

RF/EMI Shielding Effectiveness Testing

RF/EMI Shielding Effectiveness Testing

SKU: sku-1900

Weight: 26 lb
Frequency Range: 95 kHz (Crystal Controlled)
Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycle
Receiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dB
Transmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy
VIEW PRODUCT Cart
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: 10546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.
Pulse repetition: 1 shot/9 seconds
Pulse voltage (open circuit): 200V - 6.6kV ± 10%
Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864
IN STOCK
VIEW PRODUCT Cart