Browse Equipment by Test Application

Test Applications Categories

RF Interference Analyzers & Scanners

Lightning Induced Transient Susceptibility Testing

Tempest Testing

Safety/Compliance

Battery Testing Equipment

Spectrum Analyzers for EMC Testing

Test Applications Test Equipment, Systems & Solutions

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

SKU: sku-410

Weight: 17 kg (37.5 Pounds)

Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

Dimensions: 19"/3 HU

Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

Impedance: 50 Ohms

Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

Maximum Continuous Power: 80W (nominal)

Standards Met: IEC 61000-4-6

Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

Voltage Rating: 1 V to 30 Volts Max

Inquire for Availability

VIEW PRODUCT Cart
Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides

SKU: 10393

Application/Test Type: Radiated Susceptibility Testing

Frequency Range: 30 to 1000 MHz

Max Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*

Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

VIEW PRODUCT Cart
Teseq CDN 118-T4 Coupling Decoupling Network set for 1.2/50 µs and 10/700 µs Surge Pulses on 1 or 2 twisted pairs

SKU: 30093

Application/Test Type: 1.2/50 μs (2 ohms) and 10/700 μs (15 ohms) pulse up to 6.6 kV line to ground, 3 kV line to line (Pulse frequency: 3 per minute)

Current Rating: 0.5 Amps

Decoupling chokes 1 kHz: 20 mH nominal

Dimensions: 335 x 232 x 180mm

Mains & EUT Connections: 4 mm safety banana; Fischer 103

Ohmic resistance per path: 3 Ω

Series resistor: in relation to the selected pulse coupling network

Transmission 3 dB BW: 250 kHz

Voltage Rating: 250 Volts AC/DC

Inquire for Lead Time

VIEW PRODUCT Cart
3ctest CWS 600 6kV Surge Simulator for IEC 61000-4-5

SKU: 11331

New Systems: Inquire to purchase a new unit

Standards Met: UL 1449, IEC/EN 61000-4-5, IEC/ISO 60601-1-2

Coupling: Single Phase Built in, 16A, 250VAC, 120VDC

Applications: EMC Surge, CE Marking

Mains & EUT Connections: 4mm banana plug

Polarity: Positive, Negative, Alternate

Pulse current (short circuit): 0.1kA-3kA ±10%

Pulse repetition: 1-999

Pulse voltage (open circuit): 0.2kV - 6kV ±10%

Cost New:

Was:

Price Now:

$1,490.00 - $18,950.00

In stock

ORDERING OPTIONS
3ctest LSS 160SS Single Stroke Test System for DO-160 Section 22 Pulses 1, 4, 5A, 5B

SKU: 22328

Impedance: 1Ω, 5Ω

Output: single stroke

Peak current: 1600A

Polarity: +/-

Supply Voltage: AC220V single phase 10A

6-8 Months

VIEW PRODUCT Cart
3ctest CCS 600 Conducted Immunity Test System

SKU: 10327

Applications: EFT/Burst, Surge Immunity, Power Failures

Built in CDN: 250 Volts/20 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 6 kV

Test Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-29

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Test Setup: Conducted Immunity/Susceptibility Test Setup

Typically In Stock

VIEW PRODUCT Cart
Thermo-Keytek MZ15/EC Minizap ESD Simulator

SKU: 10322

2 reviews

Voltage Range (Contact Mode): ±0.5 to 8 kV

±0.5 to 15 kV (Air Discharge): ±0.5 to 15 kV

EMC Standards: IEC 61000-4-2

R/C Network: 150 pF/330 ohm standard

Discharge Frequency Range: Single shot as well as 1/sec and 20/sec repetitive operation

Power: Battery or AC

HV Monitoring: Digital LCD display measures actual HV at the tip with 10 V resolution, ~3% accuracy

Cost New:

Was:

Price Now:

$495.00 - $6,250.00

In Stock

ORDERING OPTIONS
Haefely ECOMPACT4 Precompliant EMC Impulse Generator

SKU: sku-320

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC/EN 61000-4-4

Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Test Setup Support: Conducted Immunity/Susceptibility Test Setup

Max EUT Current (w/ Built in CDN): 16 Amps

Max EUT Voltage (w/ Built in CDN): 60 Volts

Peak inrush current capability: >500 Amps

EFT/Burst Pulse Output Capability: 4.2 kV

Combination/Wave Surge Output Capability: 4.2kV

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Dips, Interrupts & Variations: 0%, 40%, 70%, 80%

Typically In Stock

VIEW PRODUCT Cart
Teseq NSG 435 ESD Gun

SKU: 11449

2 reviews

Test Standards: IEC 61000-4-2

Applications: Medical, Commercial Electronics, IT, and more

Test Capabilities: Air/Contact up to 15kV

Pre-programmed Test Limits: Yes

More Resources: Test Setup, ESD Waveform, RMA Form

Cost New:

Was:

Price Now:

$590.00 - $8,495.00

In Stock

ORDERING OPTIONS
Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

SKU: sku-302

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Amps

Frequency Range: 10 kHz to 50 MHz

Inductors: 50 µH (0.10 µF Coupling Capacitor)

Mains & EUT Connections: Terminal Screw

RF Connector: 50Ω N-type (female)

Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)

Voltage Rating: 500 VAC (Line to Ground), 800 VDC

VIEW PRODUCT Cart
Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

SKU: 1551

Test: CISPR 14

Application/Test Type: Conducted Emissions, Radiated Emissions

Clamp factor (CF): -3 dB to +4 dB

Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

Frequency Range: 30 MHz to 1000 MHz

Isolated lines under test: Power supply lines and other connecting lines

Max. Cable Diameter: 32 mm (1.26 inches)

Min. site attenuation: 14 dB to 21 dB

RF Connector: BNC (f), 50 Ohms

Inquire for Availability

VIEW PRODUCT
PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

SKU: 10264

Weight: 50 kg (110 pounds)

Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)

Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 4P5W connector

RF Connector: BNC (f)

Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)

VIEW PRODUCT Cart

Test Applications

RENTALS ARE FAST & EASY

Test Applications Categories

Test Applications Test Equipment, Systems & Solutions