Ametek CTS

Ametek CTS Categories

Amplifier Research

EM Test

Instruments for Industry (IFI) Amplifiers

Teseq (Schaffner)

Ametek CTS Test Equipment

EM Test CNI 503 3-Phase Coupling Decoupling Network

SKU: 3450

Applications: Conducted Immunity

Test Standards: IEC 61000-4-4, IEC 61000-4-5, EN/IEC 61000-4-12

EUT Supply: 3x480V, 16A AC

Burst: 5.5 kV

Surge: 5 kV

In Stock

VIEW PRODUCT Cart
Teseq CDN T8 Coupling/Decoupling Network for RJ 11, RJ45 PoE 1Gbps Testing

SKU: sku-862

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω

Current Rating: 500mA (line), 1.2A (pair)

Decoupling of Common Mode Disturbance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 50 Ohm Female BNC

VIEW PRODUCT Cart
EM Test LD 200N Load Dump Generator for ISO 16750-2

SKU: 5955

Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

Cost New:

Was:

Price Now:

$1,690.00 - $2,290.00

Typically In Stock

ORDERING OPTIONS
Amplifier Research AR 15S1G6, 15 Watt, 0.7 GHz – 6 GHz, RF Power Amplifier

SKU: sku-703

Weight: 15.9 kg (35 lbs)

Dimensions: 50.3 x 15.5 x 37.6 cm 19.8 x 6.1 x 14.8 in

Flatness: ±1.5 dB typical; ±2.0 dB maximum

Frequency Range: 0.7–6GHz instantaneously

Gain: GAIN (at maximum setting): 43 dB minimum GAIN ADJUSTMENT (Continuous Range): 10 dB minimum (4096 steps remote)

Inquire for availability

VIEW PRODUCT Cart
Teseq CIP 9136A Bulk Current Injection Test Clamp

SKU: 8766

Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outside

Connector: N-Type up to 1,000 Watts

Dimensions: 61 mm wide (2.4 inches)

Frequency Range: 4 kHz - 400 MHz

Impedance: 100 Ω typical at resonance

Cost New:

Was:

Price Now:

$440.00

Typically in Stock

ORDERING OPTIONS
Rent Teseq (Schaffner) CDN 163 3-Phase, 100 Amp EFT/Burst Coupling Network

SKU: 5411

EUT Supply Voltage: 690 VAC / 1000 VDC

EUT Current (AC or DC): ≥100 A continuous 150 A for approx. 30 min

EFT/Burst Pulse Peak Voltage: Up to 8000 V

Terminals: Screw terminals, 50 mm² rated for 150 A

Applications: Conducted Immunity

Cost New:

Was:

Price Now:

$560.00 - $5,600.00

In Stock

ORDERING OPTIONS
EM Test DPA 500N Power Analyzer for Harmonics & Flicker

SKU: sku-242

Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

Application/Test Type: Medical Device EMC Testings

Typically In Stock

VIEW PRODUCT Cart
EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail

SKU: 10240

Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 264 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Inquire for Availability

VIEW PRODUCT Cart
EM Test VSS 500N10 High Voltage Transient Surge Simulator

SKU: 30060

Compatible CDN's: CNV 501S4, CNV 501S4.1, CNV 503S9, CNV 503N10.1, CNV 503S11, CNV 503S12

Applications: Conducted Immunity

Test Standards: IEC/EN 60065, IEC/EN 60950-1, UL 6500

Surge Output Voltage: 500V to 10 kV

Typically In Stock

VIEW PRODUCT Cart
Teseq CBL 6111D Bilog Antenna, 30 MHz - 1 GHz

SKU: 10110

Weight: approx. 3.5 kg

Antenna Factor (1 Meter): 6 dB/m to 24 dB/m

Antennas: Bilogical Antennas

Application/Test Type: Compliance emission testing

Connector: N-type female

Inquire for Availability

VIEW PRODUCT Cart
Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

SKU: 6861

Frequency Range: 30 MHz to 1000 MHz

Min. Site Attenuation: 13 dB to 22 dB

Clamp Factor: -4 dB to +5 dB

Decoupling factor DF: >21 dB

Decoupling factor DR: >30 dB

Cost New:

Was:

Price Now:

$4,965.00

In Stock
Teseq NSG 437 ESD Simulator for IEC 61000-4-2 and ISO 10605

SKU: 10117

1 review

Test Standards: ISO 10605, IEC 61000-4-2,

ESD Voltage Output Range (Air/Contact): 30kV

Interchangeable R/C Modules: Yes

Battery Life: None

Applications: EV and Automotive

Cost New:

Was:

Price Now:

$490.00 - $1,090.00

IN STOCK

ORDERING OPTIONS