Ametek CTS

Ametek CTS Categories

Amplifier Research

EM Test

Instruments for Industry (IFI) Amplifiers

Teseq (Schaffner)

Ametek CTS Test Equipment

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

SKU: sku-253

Weight: Approx. 36kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19"/6HU (555mm x 448mm x 286mm)

Frequency range: 10Hz - 250kHz

General Data: Technical Details

VIEW PRODUCT Cart
Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

SKU: sku-218

Weight: 100 kg (220.5 lb)

Application/Test Type: Automated Surge Testing for EUT up to 63 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

Current Rating: 3 x 63 Amp continuous (peak 3 x 100 Amp for 30 min.)

Dimensions: 570 x 840 x 630mm (22.4 x 33 x 24.8")

Frequency Range: DC – 65 Hz with no loss, 400 Hz max. with power loss

Inquire for Availability

VIEW PRODUCT Cart
EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

SKU: 10693

Test Capabilities: EFT Immunity

Standards Met: IEC/EN 61000-4-4

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 32 Amps

INQUIRE

VIEW PRODUCT Cart
Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

SKU: 10795

Weight: Approx. 40 kg (88 lbs)

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: IEC/external

Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

Display Interface: 7“ touch-screen

VIEW PRODUCT Cart
Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

SKU: sku-219

Application/Test Type: Automated Surge Immunity Testing

Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

Voltage Rating: 480 VAC rms Line to Line

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research AT3000 E Field Generator

SKU: sku-1731

Applications: Radiated Susceptibility

Built in Load: No

Frequency Range: 10 kHz - 30 MHz

Max Radiated Field Strength: 135 V/m

VIEW PRODUCT Cart
Amplifier Research MT06002 Multi-Tone RF Radiated & Conducted Immunity System

SKU: 11384

Applications: EMC RF/Radiated Susceptibility Testing

Frequency Range: 10 kHz to 6 GHz

Average Output Power: 10 dBm

Max. Reverse Power: 24 dBm

Modulation: AM, FM, Pulse, Phase

Inquire for Availability

VIEW PRODUCT Cart
IFI M33 10 kHz to 230 MHz 35 Watt RF Power Amplifier

SKU: sku-467

Max Frequency: 230 MHz

Min Frequency: 10 kHz

Output Power: 35 Watts

Applications: RF Conducted Immunity, Medical

Standards: IEC 61000-4-6

VIEW PRODUCT Cart
AR CI00 Series RF Conducted Immunity Systems

SKU: 10420

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 60Vrms

BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

VIEW PRODUCT Cart
Teseq CBL 6112D Bilog Antenna, 30 MHz to 2 GHz, 300 Watts CW

SKU: 10112

Impedance: 50 Ohms

Weight: approx. 4.2 kg (9.25 LB's)

Antenna Factor (1 Meter): 7 to 27 dB/m

Antennas: Bilogical Antennas

Application/Test Type: VHF radio approval applications, Compliance Emission Testing

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research AT 5000 E-Field Generator for Precompliance RFI Testing

SKU: sku-766

VIEW PRODUCT Cart
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4

SKU: sku-293

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

VIEW PRODUCT Cart