Solar 2654-2 Overview
The EMC Shop stocks the Solar 2654 lightning generator systems to meet DO-160 Section 22 level 3 testing requirements. All coupling clamps and setup accessories for single and/or multi-stroke testing are available. Rentals ship immediately.
APPLICATION:
The Solar Model 2654-2 Lightning Generator synthesizes electrical impulses needed for testing susceptibility to transients induced in aircraft equipment by lightning strikes. The peak voltage and current requirements of RTCA/DO-160E/F/G Section 22 are met at Levels 1 through 3. Using available accessory devices, transient waveforms can be applied by pin injection, cable bundle injection and ground injection.
CONFIGURATIONS AVAILABLE:
Solar 2654-1 with:
TYPE 9616-1 SN:065415
TYPE 2915-3 SN:106001
TYPE 9719-1N SN:056812
TYPE 9616-2 SN:065417
TYPE 9616-2 SN:065418
TYPE 2915-1 SN:105002
TYPE 2915-2 SN:105502
TYPE 7541-1 SN:083563
TYPE 9454-1 SN:101502
TYPE 9454-1 SN:101702
2654-1/AEC w/x3 adapter
2654-1/EEC1/2 w/x3 adapter
2654-1/FEP w/x3 adapter
2654-1/EEC3 w/x3 adapter
2654-1/EEP w/x3 adapter
2816-1
9914-1
2816-1
2806-1M
2806-1BN
2454-E1
2654-F1
2654-B
2654-C
2654-D
Powercord
TYPE 9916-1 x4
Solar 2654-2:
Model 2654-2 Lightning Generator System
2654-1/FD Waveform 1/5A Driver Module
2654-2/FDG Waveform 1 Driver Module (Ground Injection)
2654-B Waveform 2 Module
2654-C Waveform 3A Module
2654-D Waveform 3B Module
2654-2/ED Waveform 4 Driver Module
2915-1 Injection Clamp
2915-2 Injection Clamp
2915-3 Injection Clamp
2654-2/R Blank Interface Module (2)
2654-2/R2 Dbl Blank Interface Module
2654-2/AEC External Module
2654-2/EEC1/2 External Module
2654-2/EEC3 External Module
2654-2/EEG External Module
2654-2/EEP External Module
2654-1/FEP External Module
2654-1/FEC External Module
2654-1/FEG External Module
2903-1 Series Resistor, 25 Ohms, WF3A Pin Injection
2806-1M Coaxial Cable with Banana Plug connectors
2806-1BN Coaxial Cable with Banana Plug and N connectors
Type 9616-2 Coupling Clamp (2 required)
Type 9916-1 Jumper for 9916-1 (incl. w/9616-2) 8 .00
Type 2816-1 Probe Header Interface (incl. w/9616-2) 2 .00
Type 9915-1 Banana Plug Coupler (incl. w/9616-2) 2 .00
Type 21406-1N R.F. Current Probe 1
Type 2115-1 Pulse Shaping Network 1
Type 9719-1N Current Injection Probe 1
Type 2809-1 Resistive Current Monitor Loop 1
Type 2809-2 Calibration Loop 1
Type 2809-3 Calibration Loop 1
Type 9454-1 High Voltage Attenuator
DESCRIPTION
The transient format, repetition rate, and amplitude are selected using two controls on the front panel of the Model 2654-2.
The system can generate a single transient at the press of a button, or it can be programmed to generate multiple strokes as required by RTCA/DO-160E/F/G, Section 22. Waveforms can be delivered singly or in groups of 10, and for waveform 3A and 3B multiple burst sequences can be repeated at intervals of 3 seconds for 5 minutes. Multiple stroke and multiple burst tests can be performed with pseudo random or uniform transient spacing.
The transient generator modules installed in the system mainframe are automatically recognized by the microcontroller, and transient format and repetition rate options are displayed on an LCD screen. Because of the modular design, the system may be ordered with only the modules a user requires. Other modules supporting additional DO-160 waveforms may be added at any time.
FEATURES
• Modular design
• Single rack portability
• Programmable single stroke, multiple stroke, multiple burst waveforms
• Pin injection, cable bundle injection, ground injection up to Level 3
• Self-contained microprocessor control
• LCD system display
