Standards Categories
Standards
-
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines
SKU: 0481
Weight: approx. 2 kg netCoupling: Decoupling elements Resistors 200 OhmDimensions: 30 x 20 x 16 cm (w x h x d)DUT current: Current on EUT lines max. 0.1APulse amplitude: max. 6.6kV$250.00 - $1,500.00In Stock -
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 10161
Weight: 550 grams (1800 grams with storage case)Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication linesCommon Mode Impedance: 150 Ω ±20 ΩCurrent Rating: 600 mA (line), 1200 mA (pair)Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dBT -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHz -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random -
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines
SKU: sku-171
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Schwarzbeck ISN S8 Impedance Stabilization Network
SKU: 8857
Connector to EUT: RJ45 connector | CAT 6 CableMax Voltage Handling: 150 VDC | 100 VACMax Current Handling: 1 AmpApplication: Shielded Data Lines Conducted Emissions Measurements$1,800.00In Stock -
Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines
SKU: sku-172
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
FTC-10 - 10µF Microfarad Feed-Thru Capacitor
SKU: 30091
Capacitance: 10 µF (Microfarad)Tolerance: ±10%Temperature: -55°C to +70°C @ rated voltage +105°C @ 50% of rated voltageDissipation Factor: Less than 1% at 25°C (Measured at 120 Hz)Dielectric Strength: Twice the rated VDC @ 25°C for two minutesInquire for Lead Time -
Solar 2714-106R High Power Feed-Thru Capacitor
SKU: 6982
Applications: Military & Aerospace EMC TestingTest Standards: ±10%Max Voltage: 1200 VDC, 275 Volts @ 400 Hz, 500 Volts @ 60 HzMax Current: 500 AmpsTolerance: ±10%$295.00 - $4,795.00IN STOCK -
CISPR 25 ALSE Test Chamber Build & Install
SKU: 11326
Frequency Range: DC - 40 GHzIsolation: 100-110 dB typical (75 dB min in the Magnetic Field)1-6 Months -
DRHA2G Double Ridged Horn Antenna
SKU: sku-363-1
Weight: 29.5 lbs. [13.4 kg]Applications: EMC Precompliance Testing, Radiated Emissions, RF Immunity TestingAntenna Factor: 10 to 27 dB/mDimensions: 27.2” x 37.2” x 37” [69 x 94.5 x 94 cm]Frequency Range: 200 MHz to 2 GHzTypically In Stock