Standards Categories
Standards Test Equipment, Systems & Solutions
-
Rent CE Marking Conducted Immunity Transient Test System
SKU: 10671
Application/Test Type: CE Marking - Safety and EMC DirectivesStandards Met: IEC 61000-4-4, EN 61000-4-5, and moreGeneric Standards: IEC 61000-6-1, IEC 61000-6-2In Stock -
3ctest Voltage Dips & Power Frequency Module (VMT, VVT, MFT)
SKU: sku-565
Applications: EMC Precompliance Testing, Conducted ImmunityTest Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Compatible Transient Generators: 3ctest CCS 600Inquire for Availability -
Schwarzbeck NFPA 9730 Power Amplifier DC - 250 kHz
SKU: 30020
Frequency Range: DC to 250 kHzGain at 8 Ω impedance: 28 ArmsContinuous Operating Current (AC): 0.25 Ω @ AC>15 HzDC Max. Current Output: 20 A (Load impedance 1.0 Ω min.)Input Resistance (typical): 1 kΩInput Connector: BNCOutput Connector: Wing terminalsApplications: Radiated ImmunityInquire for Availability -
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz
SKU: 30151
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2, CISPR 22Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)$410.00 - $4,100.00Typically in Stock -
SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m
SKU: sku-2122
Connector: N-Type, femaleFrequency Range: 20 MHz to 330 MHzImpedance: 50 ohmMax Radiated Field Strength: 200 V/mStandards Met: MIL 461 -
In Stock -
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
SKU: 57543
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.5 to 800 V/m (0.01 V/m)Frequency Range: 100 kHz to 6 GHzStandards Met: IEC/EN 61000-4-3Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialBattery Life: 60-80 hoursTypically In Stock -
Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe
SKU: 11268
Aperture: 40 mm (1.57 inches)Insertion Loss: Less than 16dB / 5MHz - 80MHzMaximum Continuous Power: 100 Watts (for 30 minutes)RF Connector: N-type (f)Fre: 10 kHz - 175 MHzStandards Met: IEC 61000-4-6Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing$295.00 - $3,950.00In Stock -
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst
SKU: sku-221
Weight: 11 kg (24 lbs)Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.Current Rating: 100 Amp or 200 Amp continous depending on modelCompatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Mains & EUT Connections: SHV; Screw terminals, rated for 200 AStandards Met: IEC / EN 61000-4-4 up to 8.8 kVVoltage Rating: 690 V AC RMS; 1000 VDC$395.00 - $495.00In Stock -
Teseq NSG 1007 Programmable AC and DC Power Sources for IEC 61000-3-2 and -3-3
SKU: 11494
Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsInquire for Availability -
Chase CIP-8212 1 GHz BCI Probe for Conducted Susceptibility
SKU: 5787
Frequency range: 100 kHz - 1 GHzInner diameter (I.D.): 1.7" ( 43.8 mm )Connector type: N(f)Maximum input power: 100 WattsMax current field ( @400 MHz ): 400 mAMax voltage field ( @230 MHz ): 30 VrmsTest Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461$4,500.00IN STOCK -
Inquire for Availability